0
TPS92620-Q1
  • TPS92620-Q1
  • TPS92620-Q1
  • TPS92620-Q1

TPS92620-Q1

ACTIVE

Automotive, two-channel, high-current 40-V high-side LED driver with thermal sharing

Texas Instruments TPS92620-Q1 Product Info

1 April 2026 5

Parameters

Number of channels

2

Topology

Current Source

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Vin (min) (V)

4.5

Vin (max) (V)

40

Vout (min) (V)

0

Vout (max) (V)

40

Iout (max) (A)

0.5

Iq (typ) (mA)

1.2

Features

Fault Detection, Fault Diagnostic, LED Open Detection, LED Short to Ground Detection, Overtemperature protection, PWM Dimming, Thermal Sharing, Thermal shutdown

Package

HVSSOP (DGN)-12-19.6 mm² 4 x 4.9

Features

  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to 125°C, TA
  • Wide input voltage range: 4.5V to 40V
  • Thermal sharing by external shunt resistor
  • Low supply current in fault mode
  • Ultra low shutdown current in sleep mode (only for HVSSOP package)
  • Two high-precision current regulation:
    • Up to 250mA current output for each channel
    • ±5% accuracy over full temperature range
    • Independent current setting by resistor
    • Independent PWM pin for brightness control
  • Low dropout voltage:
    • Maximum dropout: 600mV for 250mA
  • Diagnostics and protection
    • LED open-circuit with auto-recovery
    • LED short-to-GND with auto-recovery
    • Diagnostic enable with adjustable threshold
    • Fault bus configurable as either one-fails–all-fail or only-failed-channel off (N-1)
    • Thermal shutdown
  • Operation junction temperature range:–40°C to 150°C
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to 125°C, TA
  • Wide input voltage range: 4.5V to 40V
  • Thermal sharing by external shunt resistor
  • Low supply current in fault mode
  • Ultra low shutdown current in sleep mode (only for HVSSOP package)
  • Two high-precision current regulation:
    • Up to 250mA current output for each channel
    • ±5% accuracy over full temperature range
    • Independent current setting by resistor
    • Independent PWM pin for brightness control
  • Low dropout voltage:
    • Maximum dropout: 600mV for 250mA
  • Diagnostics and protection
    • LED open-circuit with auto-recovery
    • LED short-to-GND with auto-recovery
    • Diagnostic enable with adjustable threshold
    • Fault bus configurable as either one-fails–all-fail or only-failed-channel off (N-1)
    • Thermal shutdown
  • Operation junction temperature range:–40°C to 150°C

Description

The TPS92620-Q1 two-channel LED driver includes an unique thermal management design to reduce temperature rising on the device. The TPS92620-Q1 is a linear driver directly powered by automotive batteries with large voltage variations to output full current loads up to 250mA per channel. External shunt resistors are leveraged to share output current and dissipate power out of the driver. The device full-diagnostic capabilities include LED open, LED short-to-GND circuit, and device overtemperature protection.

The one-fails–all-fail feature of TPS92620-Q1 can work together with other LED drivers, such as the TPS9261x-Q1, TPS9262x-Q1, TPS9263x-Q1, and TPS92830-Q1 devices, to address different requirements.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request