0
TRF0108-SEP
  • TRF0108-SEP

TRF0108-SEP

ACTIVE

Radiation-tolerant, near-DC to 12-GHz, differential to single-ended (D2S) RF amplifier

Texas Instruments TRF0108-SEP Product Info

1 April 2026 5

Parameters

Type

RF FDA

Frequency (min) (MHz)

0.01

Frequency (max) (MHz)

12000

Gain (typ) (dB)

15.2, 15.5

Noise figure (typ) (dB)

10.9

OIP3 (typ) (dBm)

27

P1dB (typ) (dBm)

11.4

Frequency of harmonic distortion measurement (GHz)

2

3rd harmonic (dBc)

-50

OIP2 (typ) (dBm)

43

2nd harmonic (dBc)

-49

Supply voltage (V)

5

Current consumption (mA)

170

Number of channels

1

Operating temperature range (°C)

-55 to 125

Rating

Space

Output enable

Yes

Radiation, SEL (MeV·cm2/mg)

43

Radiation, TID (typ) (rad)

30000

Package

— (—)-—-See data sheet

Features

  • Vendor item drawing number: VID V62/26604
  • Radiation:
    • Total ionizing dose (TID)
      • Radiation hardness assurance (RHA) up to 30krad (Si) TID
      • Enhanced low dose rate sensitivity (ELDRS) free process
      • High dose rate radiation lot acceptance testing (HDR RLAT) up to 30krad (Si) TID
    • Single event effects (SEE)
      • Single event latch-up (SEL) immune to linear energy transfer (LET) of 43MeV‑cm2/mg
      • Single event transient (SET) characterized to LET of 43MeV‑cm2/mg
  • Space-enhanced plastic (Space EP, SEP)
    • Lead-free construction
    • Extended temperature range: –55°C to +125°C
  • Differential to single-ended (D2S) RF amplifier
  • Near-DC to 12GHz
  • Gain: 15.2dB at 2GHz
  • OP1dB: 11.4dBm (2GHz), 9.4dBm (6GHz)
  • OIP3: 27dBm (2GHz), 28.5dBm (6GHz)
  • NF: 10.9dB (2GHz), 12.1dB (6GHz)
  • HD2 (1GHz): –57dBc at 2dBm
  • HD3 (1GHz): –57dBc at 2dBm
  • Additive (residual) phase noise (1GHz):
    • –154.6dBc/Hz at 10kHz offset
  • Gain and phase imbalance: ±0.6dB and ±3º
  • Differential input matched to 100Ω, Single-ended output matched to 50Ω
  • Power-down feature
  • 5V supply
  • Active current: 170mA
  • Vendor item drawing number: VID V62/26604
  • Radiation:
    • Total ionizing dose (TID)
      • Radiation hardness assurance (RHA) up to 30krad (Si) TID
      • Enhanced low dose rate sensitivity (ELDRS) free process
      • High dose rate radiation lot acceptance testing (HDR RLAT) up to 30krad (Si) TID
    • Single event effects (SEE)
      • Single event latch-up (SEL) immune to linear energy transfer (LET) of 43MeV‑cm2/mg
      • Single event transient (SET) characterized to LET of 43MeV‑cm2/mg
  • Space-enhanced plastic (Space EP, SEP)
    • Lead-free construction
    • Extended temperature range: –55°C to +125°C
  • Differential to single-ended (D2S) RF amplifier
  • Near-DC to 12GHz
  • Gain: 15.2dB at 2GHz
  • OP1dB: 11.4dBm (2GHz), 9.4dBm (6GHz)
  • OIP3: 27dBm (2GHz), 28.5dBm (6GHz)
  • NF: 10.9dB (2GHz), 12.1dB (6GHz)
  • HD2 (1GHz): –57dBc at 2dBm
  • HD3 (1GHz): –57dBc at 2dBm
  • Additive (residual) phase noise (1GHz):
    • –154.6dBc/Hz at 10kHz offset
  • Gain and phase imbalance: ±0.6dB and ±3º
  • Differential input matched to 100Ω, Single-ended output matched to 50Ω
  • Power-down feature
  • 5V supply
  • Active current: 170mA

Description

The TRF0108-SEP is a very high performance, differential-to-single-ended (D2S) amplifier optimized for radio-frequency (RF) applications. The device is an excellent choice for applications that require a D2S conversion when driven by a digital-to-analog converter (DAC) such as the high-performance DAC39RF10-SEP or AFE7950-SEP. The on-chip matching components simplify printed circuit board (PCB) implementation and provide the highest performance over the usable bandwidth. The device is fabricated using Texas Instruments’ advanced complementary BiCMOS process and is available in a space-saving, WQFN-FCRLF 2mm x 2mm package.

The TRF0108-SEP operates on a single 5V supply and consumes about 170mA of active current. A power-down feature is also available for power savings.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request