0
TPS2661
  • TPS2661
  • TPS2661
  • TPS2661
  • TPS2661
  • TPS2661
  • TPS2661
  • TPS2661

TPS2661

ACTIVE

50-V, universal 4-20-mA, ±20-mA current loop protector

Texas Instruments TPS2661 Product Info

1 April 2026 3

Parameters

Vabsmax_cont (V)

55

Vin (max) (V)

50

Vin (min) (V)

-50

Current limit (max) (A)

0.04

Current limit (min) (A)

0.025

Features

Fault output, Overvoltage protection, Power good signal, Reverse current blocking when off, Reverse polarity protection, Soft-start, Thermal shutdown

Overcurrent response

Current limiting

Fault response

Auto-retry

Ron (typ) (mΩ)

7500

Overvoltage response

Cut-off

Rating

Catalog

Soft start

Fixed

Quiescent current (Iq) (typ) (A)

0.000001

Quiescent current (Iq) (max) (A)

0.000001

Device type

eFuses and hot swap controllers

Operating temperature range (°C)

-40 to 125

Package

SOT-23-THN (DDF)-8-8.12 mm² 2.9 x 2.8

Features

  • ±50-V operating voltage, ±55-V absolute maximum
  • Integrated fixed bipolar 32-mA current limit
  • Allows 2x current limit at start-up
  • 50% space savings compared to a typical discrete protection circuit
  • Low R-on: 7.5-Ω typical
  • Low IQ (< 100 nA) – current drawn from loop when powered from external supply
  • Protection against miswiring conditions on IN and OUT
  • Protection during signal line surge IEC61000-4-5 (with external TVS)
  • Criteria-A EFT (IEC61000-4-4) immunity (with external TVS)
  • Supports loop testing without supply (TPS26610 only)
  • HART compliant
  • Enable control
  • SGOOD for system health monitoring
  • Thermal shutdown
  • ±50-V operating voltage, ±55-V absolute maximum
  • Integrated fixed bipolar 32-mA current limit
  • Allows 2x current limit at start-up
  • 50% space savings compared to a typical discrete protection circuit
  • Low R-on: 7.5-Ω typical
  • Low IQ (< 100 nA) – current drawn from loop when powered from external supply
  • Protection against miswiring conditions on IN and OUT
  • Protection during signal line surge IEC61000-4-5 (with external TVS)
  • Criteria-A EFT (IEC61000-4-4) immunity (with external TVS)
  • Supports loop testing without supply (TPS26610 only)
  • HART compliant
  • Enable control
  • SGOOD for system health monitoring
  • Thermal shutdown

Description

The TPS2661x is a compact, feature-rich, fully integrated current loop protector suitable for analog inputs, analog outputs, sensor transmitters, HART inputs, and UART IO protection. The device provides universal input protection for ±20 mA, 0 mA to 20 mA, and 4 mA–20 mA. Low RON values of 7.5 Ω minimizes drop in the current loop, thereby extending operating range and supporting operation even with lower voltage power supplies. The device can withstand and protect the loads from positive and negative supply voltages up to ±50 V. The MODE pin allows flexibility to enable 2x current limit through the device to enable proper start-up of two wire transmitters. Device is capable of operating from an external bipolar supply as low as ± 2.25 V to ±20 V. The device can also be powered from unipolar supplies as low as 3 V to 30 V. The TPS26610 and TPS26613 feature loop power mode to facilitate loop testing in un-powered state without ±Vs supplies.

The device also protects the system from output side miswiring in analog outputs and sensor transmitters by turning off the current path. The internal robust protection control blocks along with the 50-V rating of the TPS2661x help to protect against surge (IEC61000-4-5) and EFT (IEC61000-4-4) transients for signal lines. The device greatly reduces system footprint by its 2.9-mm × 1.6-mm 8-pin SOT-23 package.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request