0
TPS25981
  • TPS25981
  • TPS25981

TPS25981

ACTIVE

2.7-V to 16-V, 10-A, 6-mΩ eFuse with transient overcurrent blanking timer

Texas Instruments TPS25981 Product Info

1 April 2026 14

Parameters

Vabsmax_cont (V)

20

Vin (max) (V)

16

Vin (min) (V)

2.7

Current limit (max) (A)

11

Current limit (min) (A)

1.5

Features

Adjustable current limit, Adjustable soft start, Overcurrent protection, Overvoltage protection, Quick output discharge, Reverse current blocking when off, Thermal shutdown, adjustable UVLO

UL recognition

IEC62368, UL2367

Overcurrent response

Circuit breaker

Fault response

Auto-retry, Latch-off

Ron (typ) (mΩ)

6

Overvoltage response

Cut-off

Rating

Catalog

Soft start

Adjustable

Quiescent current (Iq) (typ) (A)

0.000417

Quiescent current (Iq) (max) (A)

0.00061

Device type

eFuses and hot swap controllers

Operating temperature range (°C)

-40 to 125

Package

VQFN-HR (RPW)-10-4 mm² 2 x 2

Features

  • Wide operating input voltage range: 2.7 V to 16 V
    • 20-V absolute maximum
  • Integrated FET with low on-resistance: R ON = 6 mΩ (typ.)
  • Fast overvoltage protection
    • Adjustable overvoltage lockout (OVLO) with 1.2-µs (typ.) response time
  • Overcurrent protection with load current monitor output (ILM)
    • Circuit-breaker response
    • Adjustable threshold (I LIM) 1.5 A – 11 A
      • ±10% accuracy for I LIM > 5 A
    • Adjustable transient blanking timer (ITIMER) to allow peak currents up to 2 × I LIM
    • Output load current monitor accuracy: ±10% (I OUT ≥ 3 A)
  • Fast-trip response for short-circuit protection
    • 640-ns (typ.) response time
    • Adjustable (2 × I LIM) and fixed thresholds
  • Active high enable input with adjustable undervoltage lockout threshold (UVLO)
  • Active low enable input with adjustable undervoltage lockout threshold (OVLO)
  • Adjustable output slew rate control (dVdt)
  • Option to drive external FET for reverse current blocking in disabled/OFF state

  • Overtemperature protection
  • Quick Output Discharge
  • Digital outputs
    • Power Good (PG) and fault indication ( FLT)

  • UL 2367 recognition (pending)
  • IEC 62368 CB certification (pending)
  • Small footprint: QFN 2-mm × 2-mm, 0.45-mm pitch
  • Wide operating input voltage range: 2.7 V to 16 V
    • 20-V absolute maximum
  • Integrated FET with low on-resistance: R ON = 6 mΩ (typ.)
  • Fast overvoltage protection
    • Adjustable overvoltage lockout (OVLO) with 1.2-µs (typ.) response time
  • Overcurrent protection with load current monitor output (ILM)
    • Circuit-breaker response
    • Adjustable threshold (I LIM) 1.5 A – 11 A
      • ±10% accuracy for I LIM > 5 A
    • Adjustable transient blanking timer (ITIMER) to allow peak currents up to 2 × I LIM
    • Output load current monitor accuracy: ±10% (I OUT ≥ 3 A)
  • Fast-trip response for short-circuit protection
    • 640-ns (typ.) response time
    • Adjustable (2 × I LIM) and fixed thresholds
  • Active high enable input with adjustable undervoltage lockout threshold (UVLO)
  • Active low enable input with adjustable undervoltage lockout threshold (OVLO)
  • Adjustable output slew rate control (dVdt)
  • Option to drive external FET for reverse current blocking in disabled/OFF state

  • Overtemperature protection
  • Quick Output Discharge
  • Digital outputs
    • Power Good (PG) and fault indication ( FLT)

  • UL 2367 recognition (pending)
  • IEC 62368 CB certification (pending)
  • Small footprint: QFN 2-mm × 2-mm, 0.45-mm pitch

Description

The TPS25981xx family of eFuses is a highly integrated circuit protection and power management solution in a small package. The devices provide multiple protection modes using very few external components and are a robust defense against overloads, short circuits, voltage surges and excessive inrush current.

Output slew rate and inrush current can be adjusted using a single external capacitor. Loads are protected from input overvoltage conditions by cutting off the output if input exceeds an adjustable overvoltage threshold. The devices respond to output overload by actively limiting the current (during start-up) or breaking the circuit (during steady-state). The overcurrent protection threshold as well as the transient overcurrent blanking timer are user-adjustable. The current limit control pin also functions as an analog load current monitor.

The devices are available in a 2-mm × 2-mm, 10-pin HotRod™ QFN package for improved thermal performance and reduced system footprint.

The devices are characterized for operation over a junction temperature range of –40°C to +125°C.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request