Product
0
TXS0204
  • TXS0204

TXS0204

ACTIVE

4-bit bidirectional voltage-level shifter for open-drain and push-pull

Texas Instruments TXS0204 Product Info

1 April 2026 3

Parameters

Bits (#)

4

Data rate (max) (Mbps)

50

Topology

Open drain, Push-Pull

Direction control (typ)

Auto-direction

Vin (min) (V)

1.1

Vin (max) (V)

3.6

Vout (min) (V)

1.65

Vout (max) (V)

5.5

Applications

GPIO, I2C, SMbus

Features

Bidirectional, Edge rate accelerator, Integrated pullup resistors

Technology family

TXS

Supply current (max) (mA)

25

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Package

DSBGA (YCJ)-12-1.471168 mm² 1.448 x 1.016

Features

  • No direction-control signal needed
  • Maximum data rates:
    • 50Mbps (push pull)
    • 2Mbps (open drain)
  • Available in the Texas Instruments NanoFree™ package
  • 1.1V to 3.6V on A port and 1.65V to 5.5V on B port
  • No power-supply sequencing required – either VCCA or VCCB can be ramped first
  • VCCA can be >, =, < VCCB
  • Latch-up performance exceeds 100mA per JESD 78, class II
  • ESD protection exceeds JESD 22:
    • A port:
      • 2000V Human-Body Model (A114-B)
      • 200V Machine Model (A115-A)
      • 1000V Charged-Device Model (C101)
    • B port:
      • 4kV Human-Body Model (A114-B)
      • 200V Machine Model (A115-A)
      • 1000V Charged-Device Model (C101)
  • No direction-control signal needed
  • Maximum data rates:
    • 50Mbps (push pull)
    • 2Mbps (open drain)
  • Available in the Texas Instruments NanoFree™ package
  • 1.1V to 3.6V on A port and 1.65V to 5.5V on B port
  • No power-supply sequencing required – either VCCA or VCCB can be ramped first
  • VCCA can be >, =, < VCCB
  • Latch-up performance exceeds 100mA per JESD 78, class II
  • ESD protection exceeds JESD 22:
    • A port:
      • 2000V Human-Body Model (A114-B)
      • 200V Machine Model (A115-A)
      • 1000V Charged-Device Model (C101)
    • B port:
      • 4kV Human-Body Model (A114-B)
      • 200V Machine Model (A115-A)
      • 1000V Charged-Device Model (C101)

Description

This 4-bit non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.1V to 3.6V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65V to 5.5V. This allows for low-voltage bidirectional translation between any of the 1.1V, 1.8V, 2.V, 3.3V, and 5V voltage nodes.

When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.

The TXS0104 is designed so that the OE input circuit is supplied by VCCA.

For the high-impedance state during power up or power down, tie OE to GND through a pull-down resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

Subscribe to Welllinkchips !
Your Name
* Email
Popular Posts
Featured Parts More >
Submit a request
CONTACT US
Company address

WELL LINK CHIPS GROUP CO.,LIMITED FLAT/RM 1802 BEVERLY HOUSE 93-107 LOCKHART ROAD WANCHAI HK

Send Enquiry
SEND e-MAIL
Office hour from 9am to 6pm ,
Monday through Friday, UTC/GMT +8