0
TL7700-SEP
  • TL7700-SEP
  • TL7700-SEP

TL7700-SEP

ACTIVE

Radiation-tolerant, 40-V adjustable voltage supervisor in a plastic package

Texas Instruments TL7700-SEP Product Info

1 April 2026 4

Parameters

Rating

Space

Number of supplies monitored

1

Threshold voltage 1 (typ) (V)

Adjustable

Features

Reset time delay, Separate VDD & sense, Undervoltage monitor only, Wide input voltage

Iq (typ) (mA)

0.6

Output driver type/reset output

Active-low, Open-drain

Time delay (ms)

0.005

Watchdog timer WDI (s)

None

Supply voltage (min) (V)

1.8

Supply voltage (max) (V)

40

Operating temperature range (°C)

-55 to 125

Package

TSSOP (PW)-8-19.2 mm² 3 x 6.4

Features

  • VID V62/19602
  • Radiation hardened
    • Single event latch-up (SEL) immune to 43 MeV-cm2/mg at 125°C
    • Total ionizing dose (TID) RLAT for every wafer lot up to 20 krad(Si)
  • Space enhanced plastic
    • Controlled baseline
    • Gold wire
    • NiPdAu lead finish
    • One assembly and test site
    • One fabrication site
    • Available in military (–55°C to 125°C) temperature range
    • Extended product life cycle
    • Extended product-change notification
    • Product traceability
    • Enhanced mold compound for low outgassing
  • Adjustable sense voltage with two external resistors
  • 1% sense voltage tolerance (25°C)
  • Adjustable hysteresis of sense voltage
  • Wide operating supply-voltage range: 1.8 V to 40 V
  • Low power consumption: ICC = 0.6 mA typical, VCC = 40 V
  • VID V62/19602
  • Radiation hardened
    • Single event latch-up (SEL) immune to 43 MeV-cm2/mg at 125°C
    • Total ionizing dose (TID) RLAT for every wafer lot up to 20 krad(Si)
  • Space enhanced plastic
    • Controlled baseline
    • Gold wire
    • NiPdAu lead finish
    • One assembly and test site
    • One fabrication site
    • Available in military (–55°C to 125°C) temperature range
    • Extended product life cycle
    • Extended product-change notification
    • Product traceability
    • Enhanced mold compound for low outgassing
  • Adjustable sense voltage with two external resistors
  • 1% sense voltage tolerance (25°C)
  • Adjustable hysteresis of sense voltage
  • Wide operating supply-voltage range: 1.8 V to 40 V
  • Low power consumption: ICC = 0.6 mA typical, VCC = 40 V

Description

The TL7700-SEP is a bipolar integrated circuit designed for use as a reset controller in microcomputer and microprocessor systems. The SENSE voltage can be set to any value greater than 0.5 V using two external resistors.

Circuit function is very stable, with supply voltage in the 1.8-V to 40-V range. Minimum supply current allows use with AC line operation and portable battery operation. The TL7700-SEP device is designed for operation from –55°C to 125°C.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request