0
TAD5242
  • TAD5242

TAD5242

ACTIVE

Hardware-control stereo audio DAC with 120dB dynamic range, and headphone and line driver

Texas Instruments TAD5242 Product Info

1 April 2026 9

Parameters

Number of DAC channels

2

Sampling rate (min) (kHz)

8

Sampling rate (max) (kHz)

192

THD+N (dB)

-100

Control interface

H/W

Resolution (Bits)

32

DAC SNR (typ) (dB)

120

Analog outputs

2

Architecture

Delta-Sigma

Operating temperature range (°C)

-40 to 125

Rating

Catalog

Package

VQFN (RGE)-24-16 mm² 4 x 4

Features

    • Stereo audio DAC performance:
      • DAC to differential line-out dynamic range: 120dB
      • DAC to pseudo-differential headphone-out dynamic range: 110dB
      • DAC to differential line-out THD+N: –100 dB
      • Output voltage:
        • Differential Line-out/Receiver, 2VRMS full-scale
        • Pseudo-differential Headphone, 1VRMS full-scale
        • Single-ended Line-out, 1VRMS full-scale
      • DAC sample rates (fs) = 8kHz to 192kHz
    • Key Features
      • Pin or Hardware Control
      • Audio Serial Interface
        • Format: TDM, LJ or I2S
        • Bus Controller and Target Modes
        • Daisy chain in TDM Mode
        • Word Length: Selectable 24 or 32 Bits
      • Pin-selectable digital interpolation filter options:
        • Linear-phase
        • Low-latency
      • Auto clock detection
      • Interrupt output on clock error
      • Single supply operation AVDD: 1.8V or 3.3V
      • I/O Supply Operation: 1.8V or 3.3V
      • Temperature grade 1: –40°C ≤ TA ≤ +125°C
    • Stereo audio DAC performance:
      • DAC to differential line-out dynamic range: 120dB
      • DAC to pseudo-differential headphone-out dynamic range: 110dB
      • DAC to differential line-out THD+N: –100 dB
      • Output voltage:
        • Differential Line-out/Receiver, 2VRMS full-scale
        • Pseudo-differential Headphone, 1VRMS full-scale
        • Single-ended Line-out, 1VRMS full-scale
      • DAC sample rates (fs) = 8kHz to 192kHz
    • Key Features
      • Pin or Hardware Control
      • Audio Serial Interface
        • Format: TDM, LJ or I2S
        • Bus Controller and Target Modes
        • Daisy chain in TDM Mode
        • Word Length: Selectable 24 or 32 Bits
      • Pin-selectable digital interpolation filter options:
        • Linear-phase
        • Low-latency
      • Auto clock detection
      • Interrupt output on clock error
      • Single supply operation AVDD: 1.8V or 3.3V
      • I/O Supply Operation: 1.8V or 3.3V
      • Temperature grade 1: –40°C ≤ TA ≤ +125°C

Description

The TAD5242 is a 2VRMS 120dB stereo audio DAC that can be configured for either line output or headphone load and supports both single-ended and differential output options. The device integrates a phase-locked loop (PLL) and supports sample rates up to 192kHz. TAD5242 can drive upto 62.5 mW into a 16Ω headphone load. The TAD5242 supports time-division multiplexing (TDM), left-justified (LJ), or I2S audio formats in controller and target modes, and is pin or hardware controlled. These integrated high-performance features, pin control along with a single supply operation, make TAD5242 an excellent choice for space-constrained audio applications.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request