0
ACTIVE
Architecture |
FET / CMOS Input, Voltage FB |
Number of channels |
1 |
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) |
2.2 |
Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) |
5.5 |
GBW (typ) (MHz) |
50 |
BW at Acl (MHz) |
50 |
Acl, min spec gain (V/V) |
1 |
Slew rate (typ) (V/µs) |
25 |
Vn at flatband (typ) (nV√Hz) |
4.5 |
Vn at 1 kHz (typ) (nV√Hz) |
4.5 |
Iq per channel (typ) (mA) |
4.6 |
Vos (offset voltage at 25°C) (max) (mV) |
0.2 |
Rail-to-rail |
In, Out |
Features |
Zero Crossover |
Rating |
Automotive |
Operating temperature range (°C) |
-40 to 125 |
CMRR (typ) (dB) |
120 |
Input bias current (max) (pA) |
10 |
Offset drift (typ) (µV/°C) |
1 |
Iout (typ) (mA) |
65 |
SOT-23 (DBV)-5-8.12 mm² 2.9 x 2.8
The OPAx365-Q1 zero-crossover family, rail-to-rail, high-performance, CMOS operational amplifiers are optimized for very low voltage, single-supply applications. Rail-to-rail input/output, low noise (4.5 nV/√ Hz) and high speed operation (50-MHz gain bandwidth) make these devices ideal for driving sampling data converters (such as the ADS7822-Q1 or the ADS1115-Q1), specifically in short to mid-range radar applications. The OPAx356-Q1 family of operational amplifiers are also well-suited for HEV/EV and Powertrain applications in DC-DC converters and as transmission control in engine control units.
Special features include an excellent common-mode rejection ratio (CMRR), no input stage crossover distortion, high input impedance, and rail-to-rail input and output swing. The input common-mode range includes both the negative and positive supplies. The output voltage swing is within 10 mV of the rails.
The OPA365-Q1 (single version) is available in the 5-pin SOT-23 package. The OPA2365-Q1 (dual version) is available in the 8-pin SOIC package. All versions are specified for operation from −40°C to 125°C. Single and dual versions have identical specifications for maximum design flexibility.
WELL LINK CHIPS GROUP CO.,LIMITED FLAT/RM 1802 BEVERLY HOUSE 93-107 LOCKHART ROAD WANCHAI HK
