0
Supply voltage (min) (V) |
1.65 |
Supply voltage (max) (V) |
3.6 |
Number of channels |
16 |
IOL (max) (mA) |
24 |
IOH (max) (mA) |
-24 |
Input type |
LVTTL |
Output type |
LVTTL |
Features |
Balanced outputs, Bus-hold, Ultra high speed (tpd <5ns) |
Technology family |
ALVC |
Rating |
Catalog |
Operating temperature range (°C) |
-40 to 85 |
TSSOP (DGG)-56-113.4 mm² 14 x 8.1
Widebus, EPIC are trademarks of Texas Instruments.
This 16-bit registered transceiver is designed for 1.65-V to 3.6-V VCC operation.
The SN74ALVCH16952 contains two sets of D-type flip-flops for temporary storage of data flowing in either direction. This device can be used as two 8-bit transceivers or one 16-bit transceiver. Data on the A or B bus is stored in the registers on the low-to-high transition of the clock (CLKAB or CLKBA) input provided that the clock-enable (CLKENAB or CLKENBA) input is low. Taking the output-enable (OEAB or OEBA) input low accesses the data on either port.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.
The SN74ALVCH16952 is characterized for operation from -40°C to 85°C.