0
F29P329SM-Q1
  • F29P329SM-Q1

F29P329SM-Q1

PREVIEW

Automotive C2000 64-bit MCU with C29x 200MHz, lockstep, functional safety compliance, 2MB

Texas Instruments F29P329SM-Q1 Product Info

1 April 2026 18

Parameters

TI functional safety category

Functional Safety-Compliant

Operating temperature range (°C)

to

Rating

Automotive

Package

HTQFP (PZS)-100-196 mm² 14 x 14

Features

Real-time Processing

  • Three C29x 64-bit CPUs (CPU1, CPU2, CPU3) running at 200MHz
    • 2x signal chain performance versus C28x with improved pipeline
    • Split lock and lockstep operating modes
  • C29x CPU architecture
    • Byte addressability
    • High-performance real-time control with low latency
    • High-performance DSP and general-purpose processing capabilities
    • VLIW CPU executes 1 to 8 instructions in parallel
    • Fully protected pipeline
    • 8/16/32/64-bit single-cycle memory operations, up to two 64-bit memory reads and one 64-bit memory write in a single-cycle
    • IEEE 32-bit and 64-bit floating operations
    • 32-bit and 64-bit trigonometric operations
    • HW interrupt prioritization and nesting
    • 11-cycle real-time interrupt response
    • Atomic operations with memory protection
    • Multi safe island code execution managed in hardware

Memory

  • 4MB of CPU-mappable flash (ECC-protected) capable of supporting Firmware Over the Air (FOTA) with A/B swap and LFU
  • 256KB of Data-only Flash (ECC-protected)
  • 452KB of RAM (ECC-protected)
  • Dedicated 512KB Flash and 40KB RAM memories for HSM (ECC-protected)
  • Built in ECC logic for system-wide safety

Safety Peripherals

  • CPU1 and CPU2 lockstep
    • CPU1 and CPU2 splitlock mode is also available (for applications not needing functional safety or using methods like Reciprocal Comparison with multiple CPUs)
  • Logic Power-On Self-Test (LPOST)
  • Memory Power-On Self-Test (MPOST)
  • Error Signaling Module (ESM)
  • Dual-clock Comparator (DCC)
  • Waveform Analyzer and Diagnostics (WADI)
  • Context-sensitive Memory and Peripheral Protection with SSU
  • Safety Interconnect (SIC)
  • Functional Safety-Compliant targeted
    • Developed for functional safety applications
    • Documentation to aid ISO 26262 and IEC 61508 system design will be available upon production release
    • Systematic capability up to ASIL D and SIL 3 targeted
    • Hardware capability up to ASIL D and SIL 3 targeted
  • Safety-related certification
    • ISO 26262 certification up to ASIL D and IEC 61508 SIL 3 by TÜV SÜD planned

Security

  • Hardware Security Module (HSM)
    • Independently running Arm Cortex-M4 based security controller subsystem at 100MHz
    • 512KB of flash (ECC-protected)
    • 36KB of RAM (ECC-protected)
    • Secure key storage
    • Secure BOOT
    • Secure Debug
    • Dedicated 8-channel Real-Time Direct Memory Access (RTDMA) controller
    • EVITA-full support
    • FOTA with A/B swap
    • Hardware cryptographic accelerators
      • Asymmetric cryptography - RSA, ECC, SM2
      • Symmetric cryptography - AES, SM4
      • Hash operations - SHA2, HMAC, SM3
      • True Random Number Generator
  • Safety and Security Unit (SSU)
    • Advanced Real-Time Safety and Security
      • 64 Memory Access Protection Ranges per CPU
      • Up to 15 user LINKs and 7 stack pointers per CPU for hardware code isolation
      • Power-on Self-test (POST) capability
      • FOTA and LFU support with rollback control

Analog Subsystem

  • Five Analog-to-Digital Converters (ADCs)
    • Two 16-bit ADCs, 1.19MSPS each
    • Three 12-bit ADCs, 3.92MSPS each
    • Up to 80 single-ended or 16 differential inputs
    • 40 redundant input channels for flexibility
    • Separate sample-and-hold (S/H) on each ADC for simultaneous sampling
    • Hardware post-processing of conversions
    • Hardware oversampling (up to 128x) and undersampling modes, with accumulation, averaging and outlier rejection
    • Programmable delay from SOC trigger to start of conversion
    • Ten ADC Safety Checkers for comparison of conversion results across multiple ADC modules
  • 12 windowed comparators with 12-bit Digital-to-Analog Converter (DAC) references
    • Connection options for internal temperature sensor and ADC reference
  • Two 12-bit buffered DAC outputs

Control Peripherals

  • 36 Pulse Width Modulator (PWM) channels, all with high-resolution capability (HRPWM)
    • Minimum Dead-Band Logic (MINDB)
    • Illegal Combo Logic (ICL) for standard and high resolution
    • Diode Emulation (DE) support
    • Multilevel shadowing on XCMP
  • Six Enhanced Capture (eCAP) modules
    • High-resolution Capture (HRCAP) available on two of the six eCAP modules
    • Two new monitor units for edge, pulse width and period that can be coupled with ePWM strobes and trip events
    • Increased 256 multiplexed capture inputs
    • New ADC SOC generation capability
  • Six Enhanced Quadrature Encoder Pulse (eQEP) modules
  • 16 Sigma-Delta Filter Module (SDFM) input channels, 2 independent filters per channel
  • Embedded Pattern Generator (EPG)
  • Configurable Logic Block (CLB)
    • Six tiles
    • Augments existing peripheral capability
    • Supports position manager solutions

Communications Peripherals

  • EtherCAT SubordinateDevice (or SubDevice) Controller (ESC)
  • Fast Serial Interface (FSI) with four transmitters and four receivers
  • Five high-speed (up to 50MHz) SPI ports (pin-bootable)
  • Six High-Speed Universal Asynchronous Receiver/Transmitters (UARTs) (pin-bootable)
  • Two I2C interfaces (pin-bootable)
  • Two Local Interconnect Network (LIN) (supports SCI)
  • Power-Management Bus (PMBus) interface (supports I2C)
  • Six Single Edge Nibble Transmission interface (SENT)
  • Six Controller Area Networks with Flexible Data Rate (CAN FD/MCAN) (pin-bootable)

Systems Peripherals

  • External Memory Interface (EMIF) with ASRAM and SDRAM support
  • Two 10-channel Real-Time Direct Memory Access (RTDMA) controllers with MPU
  • Up to 190 usable signal pins
    • 136 General-Purpose Input/Output (GPIO) pins
    • 80 analog pins (26 AGPIOs included in GPIOs)
    • 5V fail-safe and tolerant capability on 6 GPIOs for PMBUS/I2C/SENT support
  • Peripheral Interrupt Priority and Expansion (PIPE)
  • Low-power mode (LPM) support
  • Embedded Real-time Analysis and Diagnostic (ERAD)

Clock and System Control

  • On-chip crystal oscillator
  • Windowed watchdog timer module
  • Missing clock detection circuitry
  • 1.25V core, 3.3V I/O design
    • Internal VREG for 1.25V generation
    • Brownout reset (BOR) circuit

Package Options:

  • Lead-free, green packaging
  • 256-ball New Fine Pitch Ball Grid Array (nFBGA) [ZEX suffix], 13mm x 13mm/0.8mm pitch
  • 176-pin Thermally Enhanced Thin Quad Flatpack (HTQFP) [PTS suffix], 22mm x 22mm/0.4mm pitch
  • 144-pin HTQFP [RFS suffix],18mm x 18mm/0.4mm pitch
  • 100-pin HTQFP [PZS suffix],14mm x 14mm/0.4mm pitch

Recommended TPS653860-Q1 and TPS650366-Q1 Power Management ICs (PMIC)

  • Companion PMICs specially designed to meet device power supply requirements
  • Flexible mapping and factory programmed configurations to support different use cases
  • Functional safety compliant PMICs to support external voltage monitoring and watchdog timer MCU safety requirements

Temperature

  • Ambient (TA): –40°C to 125°C

Real-time Processing

  • Three C29x 64-bit CPUs (CPU1, CPU2, CPU3) running at 200MHz
    • 2x signal chain performance versus C28x with improved pipeline
    • Split lock and lockstep operating modes
  • C29x CPU architecture
    • Byte addressability
    • High-performance real-time control with low latency
    • High-performance DSP and general-purpose processing capabilities
    • VLIW CPU executes 1 to 8 instructions in parallel
    • Fully protected pipeline
    • 8/16/32/64-bit single-cycle memory operations, up to two 64-bit memory reads and one 64-bit memory write in a single-cycle
    • IEEE 32-bit and 64-bit floating operations
    • 32-bit and 64-bit trigonometric operations
    • HW interrupt prioritization and nesting
    • 11-cycle real-time interrupt response
    • Atomic operations with memory protection
    • Multi safe island code execution managed in hardware

Memory

  • 4MB of CPU-mappable flash (ECC-protected) capable of supporting Firmware Over the Air (FOTA) with A/B swap and LFU
  • 256KB of Data-only Flash (ECC-protected)
  • 452KB of RAM (ECC-protected)
  • Dedicated 512KB Flash and 40KB RAM memories for HSM (ECC-protected)
  • Built in ECC logic for system-wide safety

Safety Peripherals

  • CPU1 and CPU2 lockstep
    • CPU1 and CPU2 splitlock mode is also available (for applications not needing functional safety or using methods like Reciprocal Comparison with multiple CPUs)
  • Logic Power-On Self-Test (LPOST)
  • Memory Power-On Self-Test (MPOST)
  • Error Signaling Module (ESM)
  • Dual-clock Comparator (DCC)
  • Waveform Analyzer and Diagnostics (WADI)
  • Context-sensitive Memory and Peripheral Protection with SSU
  • Safety Interconnect (SIC)
  • Functional Safety-Compliant targeted
    • Developed for functional safety applications
    • Documentation to aid ISO 26262 and IEC 61508 system design will be available upon production release
    • Systematic capability up to ASIL D and SIL 3 targeted
    • Hardware capability up to ASIL D and SIL 3 targeted
  • Safety-related certification
    • ISO 26262 certification up to ASIL D and IEC 61508 SIL 3 by TÜV SÜD planned

Security

  • Hardware Security Module (HSM)
    • Independently running Arm Cortex-M4 based security controller subsystem at 100MHz
    • 512KB of flash (ECC-protected)
    • 36KB of RAM (ECC-protected)
    • Secure key storage
    • Secure BOOT
    • Secure Debug
    • Dedicated 8-channel Real-Time Direct Memory Access (RTDMA) controller
    • EVITA-full support
    • FOTA with A/B swap
    • Hardware cryptographic accelerators
      • Asymmetric cryptography - RSA, ECC, SM2
      • Symmetric cryptography - AES, SM4
      • Hash operations - SHA2, HMAC, SM3
      • True Random Number Generator
  • Safety and Security Unit (SSU)
    • Advanced Real-Time Safety and Security
      • 64 Memory Access Protection Ranges per CPU
      • Up to 15 user LINKs and 7 stack pointers per CPU for hardware code isolation
      • Power-on Self-test (POST) capability
      • FOTA and LFU support with rollback control

Analog Subsystem

  • Five Analog-to-Digital Converters (ADCs)
    • Two 16-bit ADCs, 1.19MSPS each
    • Three 12-bit ADCs, 3.92MSPS each
    • Up to 80 single-ended or 16 differential inputs
    • 40 redundant input channels for flexibility
    • Separate sample-and-hold (S/H) on each ADC for simultaneous sampling
    • Hardware post-processing of conversions
    • Hardware oversampling (up to 128x) and undersampling modes, with accumulation, averaging and outlier rejection
    • Programmable delay from SOC trigger to start of conversion
    • Ten ADC Safety Checkers for comparison of conversion results across multiple ADC modules
  • 12 windowed comparators with 12-bit Digital-to-Analog Converter (DAC) references
    • Connection options for internal temperature sensor and ADC reference
  • Two 12-bit buffered DAC outputs

Control Peripherals

  • 36 Pulse Width Modulator (PWM) channels, all with high-resolution capability (HRPWM)
    • Minimum Dead-Band Logic (MINDB)
    • Illegal Combo Logic (ICL) for standard and high resolution
    • Diode Emulation (DE) support
    • Multilevel shadowing on XCMP
  • Six Enhanced Capture (eCAP) modules
    • High-resolution Capture (HRCAP) available on two of the six eCAP modules
    • Two new monitor units for edge, pulse width and period that can be coupled with ePWM strobes and trip events
    • Increased 256 multiplexed capture inputs
    • New ADC SOC generation capability
  • Six Enhanced Quadrature Encoder Pulse (eQEP) modules
  • 16 Sigma-Delta Filter Module (SDFM) input channels, 2 independent filters per channel
  • Embedded Pattern Generator (EPG)
  • Configurable Logic Block (CLB)
    • Six tiles
    • Augments existing peripheral capability
    • Supports position manager solutions

Communications Peripherals

  • EtherCAT SubordinateDevice (or SubDevice) Controller (ESC)
  • Fast Serial Interface (FSI) with four transmitters and four receivers
  • Five high-speed (up to 50MHz) SPI ports (pin-bootable)
  • Six High-Speed Universal Asynchronous Receiver/Transmitters (UARTs) (pin-bootable)
  • Two I2C interfaces (pin-bootable)
  • Two Local Interconnect Network (LIN) (supports SCI)
  • Power-Management Bus (PMBus) interface (supports I2C)
  • Six Single Edge Nibble Transmission interface (SENT)
  • Six Controller Area Networks with Flexible Data Rate (CAN FD/MCAN) (pin-bootable)

Systems Peripherals

  • External Memory Interface (EMIF) with ASRAM and SDRAM support
  • Two 10-channel Real-Time Direct Memory Access (RTDMA) controllers with MPU
  • Up to 190 usable signal pins
    • 136 General-Purpose Input/Output (GPIO) pins
    • 80 analog pins (26 AGPIOs included in GPIOs)
    • 5V fail-safe and tolerant capability on 6 GPIOs for PMBUS/I2C/SENT support
  • Peripheral Interrupt Priority and Expansion (PIPE)
  • Low-power mode (LPM) support
  • Embedded Real-time Analysis and Diagnostic (ERAD)

Clock and System Control

  • On-chip crystal oscillator
  • Windowed watchdog timer module
  • Missing clock detection circuitry
  • 1.25V core, 3.3V I/O design
    • Internal VREG for 1.25V generation
    • Brownout reset (BOR) circuit

Package Options:

  • Lead-free, green packaging
  • 256-ball New Fine Pitch Ball Grid Array (nFBGA) [ZEX suffix], 13mm x 13mm/0.8mm pitch
  • 176-pin Thermally Enhanced Thin Quad Flatpack (HTQFP) [PTS suffix], 22mm x 22mm/0.4mm pitch
  • 144-pin HTQFP [RFS suffix],18mm x 18mm/0.4mm pitch
  • 100-pin HTQFP [PZS suffix],14mm x 14mm/0.4mm pitch

Recommended TPS653860-Q1 and TPS650366-Q1 Power Management ICs (PMIC)

  • Companion PMICs specially designed to meet device power supply requirements
  • Flexible mapping and factory programmed configurations to support different use cases
  • Functional safety compliant PMICs to support external voltage monitoring and watchdog timer MCU safety requirements

Temperature

  • Ambient (TA): –40°C to 125°C

Description

The Functional Block Diagram shows the CPU system and associated peripherals.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request