0
VSP1221
  • VSP1221

VSP1221

ACTIVE

12-bit, 21 MSPS 1-Channel AFE for CCD Sensors

Texas Instruments VSP1221 Product Info

1 April 2026 4

Parameters

Resolution (Bits)

12

Sample rate (Msps)

21

Gain (min) (dB)

0

Gain (max) (dB)

36

Pd (typ) (mW)

90

Supply voltage (max) (V)

3.3

Operating temperature range (°C)

0 to 70

Output data format

CMOS Parallel

Rating

Catalog

Package

TQFP (PFB)-48-81 mm² 9 x 9

Features

  • 12-Bit, 21-MSPS, Analog-to-Digital Converter
  • Low Power: 70 mW Minimum Power-Down Mode: 4 mW
  • Low Input-Referred Noise: 75-dB SNR Typical at 0-dB Gain
  • Novel Optical-Black (OB) Calibration
  • Low-Aperture Delay
  • Single 3-V Supply Operation
  • DNL: <±0.5 LSB and <±1.5 LSB Typical at 0-dB Gain
  • Programmable-Gain Range: 0 dB to 36 dB, Gain Resolution of 0.05 dB/Step
  • 48-Pin TQFP Package
  • applications
    • Digital Still Camera
    • Digital Video Camera

  • 12-Bit, 21-MSPS, Analog-to-Digital Converter
  • Low Power: 70 mW Minimum Power-Down Mode: 4 mW
  • Low Input-Referred Noise: 75-dB SNR Typical at 0-dB Gain
  • Novel Optical-Black (OB) Calibration
  • Low-Aperture Delay
  • Single 3-V Supply Operation
  • DNL: <±0.5 LSB and <±1.5 LSB Typical at 0-dB Gain
  • Programmable-Gain Range: 0 dB to 36 dB, Gain Resolution of 0.05 dB/Step
  • 48-Pin TQFP Package
  • applications
    • Digital Still Camera
    • Digital Video Camera

Description

The VSP1221 is a highly-integrated mixed-signal IC used for signal conditioning and analog-to-digital conversion at the output of a CCD array. The IC has a correlated double sampler (CDS) and an analog programmable-gain amplifier (PGA) stage followed by an analog-to-digital converter (ADC) and a digital PGA stage. The CDS is used to sample the CCD signal and is followed by the analog PGA stage. The ADC is a 12-bit, 21-MSPS pipelined ADC. The digital PGA provides further amplification.

Additionally, there is an offset calibration loop for optical-black correction. The optical-black reference level is user-programmable. The chip also has two eight-bit digital-to-analog converters (DAC) for external analog settings.

The chip has a serial port for configuring internal control registers.

The VSP1221 is available in a 48-pin TQFP package and operates from a single 3-V power supply.