0
TPS1210-Q1
  • TPS1210-Q1
  • TPS1210-Q1
  • TPS1210-Q1
  • TPS1210-Q1

TPS1210-Q1

ACTIVE

Automotive, 45V low-Iq dual high-side driver with short circuit protection and diagnostics

Texas Instruments TPS1210-Q1 Product Info

1 April 2026 7

Parameters

Operating voltage (max) (V)

45

Operating voltage (min) (V)

3.5

Features

Overcurrent protection with adjustable delay, Precharge FET driver, Short circuit protection, VDS Sensing, high-side or Low-side current sense

Reverse polarity protection (V)

-40

Quiescent current (Iq) (µA)

35

IGate sink (typ) (A)

2

IGate source (typ) (A)

2

Short-circuit protection response time (µs)

4

Operating temperature range (°C)

-40 to 125

Rating

Automotive

Package

VSSOP (DGX)-19-15.3 mm² 5.1 x 3

Features

  • AEC-Q100 automotive qualified for automotive applications
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
  • Functional Safety-Capable
  • 3.5V to 40V input range (45V absolute maximum)
  • Reverse input protection down to –40V
  • Integrated 11V charge pump
  • Low quiescent current, 35µA in operation
  • Low 1.5µA shutdown current (EN/UVLO = Low)
  • Two strong gate drivers (2A src/sink) for back-to-back MOSFET driving with separate control inputs (INP1, INP2)
    • Variants with active high (TPS12100-Q1) and active low (TPS12101-Q1) inputs
  • Adjustable short-circuit protection (ISCP) using external Rsense or MOSFET VDS sensing with adjustable delay (TMR)
  • High or low-side current sense configuration (CS_SEL)
  • Fault indication (FLT) during short-circuit fault, charge pump under voltage, input undervoltage, and short-circuit comparator diagnosis (SCP_TEST)
  • Adjustable input undervoltage lockout (UVLO)
  • AEC-Q100 automotive qualified for automotive applications
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
  • Functional Safety-Capable
  • 3.5V to 40V input range (45V absolute maximum)
  • Reverse input protection down to –40V
  • Integrated 11V charge pump
  • Low quiescent current, 35µA in operation
  • Low 1.5µA shutdown current (EN/UVLO = Low)
  • Two strong gate drivers (2A src/sink) for back-to-back MOSFET driving with separate control inputs (INP1, INP2)
    • Variants with active high (TPS12100-Q1) and active low (TPS12101-Q1) inputs
  • Adjustable short-circuit protection (ISCP) using external Rsense or MOSFET VDS sensing with adjustable delay (TMR)
  • High or low-side current sense configuration (CS_SEL)
  • Fault indication (FLT) during short-circuit fault, charge pump under voltage, input undervoltage, and short-circuit comparator diagnosis (SCP_TEST)
  • Adjustable input undervoltage lockout (UVLO)

Description

The TPS1210x-Q1 family is a 45V, low IQ, smart high side driver with protection and diagnostics. With wide operating voltage range of 3.5V–40V, the device is designed for 12V system designs. The device can withstand and protect the loads from negative supply voltages down to –40V.

The device has two strong (2A) GATE drivers with separate control inputs (INP1, INP2) to drive back-to-back MOSFETs in common source configuration. TPS12100-Q1 has active high control inputs and TPS12101-Q1 has active low control inputs.

The device provides adjustable short-circuit protection. Auto-retry and latch-off fault behavior can be configured. Current sensing can be done either by an external sense resistor or by MOSFET VDS sensing. High side or low side current sense resistor configuration is possible by using CS_SEL pin input. The device also features diagnosis of the internal short circuit comparator using external control on SCP_TEST input.

Low Quiescent current 35µA (typical) in operation enables always ON system designs. Quiescent current reduces to 1.5µA (typical) with EN/UVLO low.

The TPS1210x-Q1 is available in a 19-pin VSSOP package.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request