0
TPS4800-Q1
  • TPS4800-Q1
  • TPS4800-Q1
  • TPS4800-Q1
  • TPS4800-Q1

TPS4800-Q1

ACTIVE

Automotive, 100V low-Iq high side driver with protection and diagnostics

Texas Instruments TPS4800-Q1 Product Info

1 April 2026 7

Parameters

Operating voltage (max) (V)

100

Operating voltage (min) (V)

3.5

Features

Fault Diagnostics, High-side RSNS, Low Quiescent Current, Overcurrent protection with adjustable delay, Overvoltage protection, Reverse polarity protection, Short circuit protection, VDS Sensing, adjustable UVLO, high-side or Low-side current sense

Reverse polarity protection (V)

-65

Quiescent current (Iq) (µA)

43

IGate sink (typ) (A)

2

IGate source (typ) (A)

2

Short-circuit protection response time (µs)

4

Operating temperature range (°C)

-40 to 125

Rating

Automotive

Package

VSSOP (DGX)-19-15.3 mm² 5.1 x 3

Features

  • 3.5V to 95V input range (100V absolute maximum)
  • Reverse input protection down to –65V
  • Integrated 11V charge pump
  • Low quiescent current, 43µA in operation
  • Low 1.5µA shutdown current (EN/UVLO = Low)
  • Strong gate driver (2A source and sink)
  • Adjustable short circuit protection (ISCP) using external Rsense or MOSFET VDS sensing with adjustable delay (TMR)
  • High or low-side current sense configuration (CS_SEL)
  • Fault indication (FLT) during short circuit fault, input under voltage and short-circuit comparator diagnosis (SCP_TEST)
  • Fault indication (FLT_GD) for gate drive UVLO
  • Adjustable input undervoltage lockout (UVLO) and overvoltage protection (OV)
  • 3.5V to 95V input range (100V absolute maximum)
  • Reverse input protection down to –65V
  • Integrated 11V charge pump
  • Low quiescent current, 43µA in operation
  • Low 1.5µA shutdown current (EN/UVLO = Low)
  • Strong gate driver (2A source and sink)
  • Adjustable short circuit protection (ISCP) using external Rsense or MOSFET VDS sensing with adjustable delay (TMR)
  • High or low-side current sense configuration (CS_SEL)
  • Fault indication (FLT) during short circuit fault, input under voltage and short-circuit comparator diagnosis (SCP_TEST)
  • Fault indication (FLT_GD) for gate drive UVLO
  • Adjustable input undervoltage lockout (UVLO) and overvoltage protection (OV)

Description

The TPS48000-Q1 is a 100V low IQ smart high side driver with protection and diagnostics. With wide operating voltage range of 3.5V–95V, the device is suitable for 12V, 24V, and 48V system designs. The device can withstand and protect the loads from negative supply voltages down to –65V.

It has a strong (2A) gate drive that enables power switching using parallel MOSFETs in high current system designs.

The device provides adjustable short circuit protection. Auto-retry and latch-off fault behavior can be configured. By using CS+ and CS– pins, current sensing can be done either by an external sense resistor or by MOSFET VDS sensing. High side or low side current sense resistor configuration is possible by using CS_SEL pin input. The device also features diagnosis of the internal short circuit comparator using external control on SCP_TEST input.

Low quiescent current of 43µA (typical) in operation enables always ON system designs. Quiescent current reduces to 1.5µA (typical) with EN/UVLO low.

The TPS48000-Q1 is available in a 19-pin VSSOP package.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request