0
TPS4810-Q1
  • TPS4810-Q1
  • TPS4810-Q1
  • TPS4810-Q1
  • TPS4810-Q1

TPS4810-Q1

ACTIVE

Automotive, 100V low-Iq dual high-side driver with short circuit protection and diagnostics

Texas Instruments TPS4810-Q1 Product Info

1 April 2026 12

Parameters

Operating voltage (max) (V)

100

Operating voltage (min) (V)

3.5

Features

Precharge FET driver, Reverse polarity protection, Short circuit protection, Undervoltage Lock Out (UVLO), VDS Sensing, high-side or Low-side current sense

Reverse polarity protection (V)

-65

Quiescent current (Iq) (µA)

35

IGate sink (typ) (A)

2

IGate source (typ) (A)

2

Short-circuit protection response time (µs)

4

Operating temperature range (°C)

-40 to 125

Rating

Automotive

Package

VSSOP (DGX)-19-15.3 mm² 5.1 x 3

Features

  • AEC-Q100 automotive qualified for automotive applications
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
  • Functional Safety-Capable
  • 3.5V to 95V input range (100V absolute maximum)
  • Reverse input protection down to –65V
  • Integrated 11V charge pump with 345µA capacity
  • Low quiescent current, 35µA in operation
  • Low 1.5µA shutdown current (EN/UVLO = Low)
  • Two strong gate drivers (2A source and sink) for back to back MOSFET driving with separate control inputs (INP1, INP2)
  • Adjustable short circuit protection (ISCP) using external Rsense or MOSFET VDS sensing with adjustable delay (TMR)
  • High or low-side current sense configuration (CS_SEL)
  • Fault indication (FLT) during short circuit fault, charge pump undervoltage, input undervoltage, and short-circuit comparator diagnosis (SCP_TEST)
  • Adjustable input undervoltage lockout (UVLO)
  • Pin-to-pin compatible with TPS1210-Q1
  • AEC-Q100 automotive qualified for automotive applications
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
  • Functional Safety-Capable
  • 3.5V to 95V input range (100V absolute maximum)
  • Reverse input protection down to –65V
  • Integrated 11V charge pump with 345µA capacity
  • Low quiescent current, 35µA in operation
  • Low 1.5µA shutdown current (EN/UVLO = Low)
  • Two strong gate drivers (2A source and sink) for back to back MOSFET driving with separate control inputs (INP1, INP2)
  • Adjustable short circuit protection (ISCP) using external Rsense or MOSFET VDS sensing with adjustable delay (TMR)
  • High or low-side current sense configuration (CS_SEL)
  • Fault indication (FLT) during short circuit fault, charge pump undervoltage, input undervoltage, and short-circuit comparator diagnosis (SCP_TEST)
  • Adjustable input undervoltage lockout (UVLO)
  • Pin-to-pin compatible with TPS1210-Q1

Description

The TPS48100-Q1 is a 100V low IQ smart high side driver with protection and diagnostics. With wide operating voltage range of 3.5V–95V, the device is suitable for 12V, 24V, and 48V system designs. The device can withstand and protect the loads from negative supply voltages down to –65V.

It has two strong 2A (source and sink) gate drivers with separate control inputs (INP1, INP2) to drive back to back MOSFETs in common source configuration. Strong GATE driving enables power switching using parallel MOSFETs in high current system designs.

The device provides adjustable short-circuit protection. Auto-retry and latch-off fault behavior can be configured. Current sensing can be done either by an external sense resistor or by MOSFET VDS sensing. High side or low side current sense resistor configuration is possible by using CS_SEL pin input. The device also features diagnosis of the internal short circuit comparator using external control on SCP_TEST input.

A low quiescent current (35µA, typical) in operation enables always ON system designs. Quiescent current reduces to 1.5µA (typical) with EN/UVLO low.

The TPS48100-Q1 is available in a 19-pin VSSOP package.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request