0
TPS7N53
  • TPS7N53
  • TPS7N53

TPS7N53

ACTIVE

3A high-PSRR ultra-low-dropout linear regulator

Texas Instruments TPS7N53 Product Info

1 April 2026 4

Parameters

Rating

Catalog

Vin (max) (V)

2.2

Vin (min) (V)

1.1

Iout (max) (A)

3

Output options

Adjustable Output

Vout (max) (V)

1.5

Vout (min) (V)

0.5

Noise (µVrms)

2.2

PSRR at 100 KHz (dB)

60

Iq (typ) (mA)

15

Features

Enable, Foldback Overcurrent protection, Output discharge, Power good, Soft start

Thermal resistance θJA (°C/W)

42.9

Load capacitance (min) (µF)

10

Regulated outputs (#)

1

Accuracy (%)

1.5

Dropout voltage (Vdo) (typ) (mV)

95

Operating temperature range (°C)

-40 to 125

Package

WQFN (RTE)-16-9 mm² 3 x 3

Features

  • Input voltage range:
    • 1.1V to 2.2V
  • Output voltage noise: 2.2µVRMS
  • 1.5% (max) accuracy over line, load, and temperature
  • Low dropout: 95mV(typ) at 3A
  • Power-supply rejection ratio (3A):
    • 80dB at 1kHz
    • 63dB at 10kHz
    • 51dB at 100kHz
    • 25dB at 1MHz
  • Adjustable output voltage range: 0.5V to 1.5V
  • Adjustable soft-start inrush control
  • Open-drain, power-good (PG) output
  • Package: 3mm × 3mm, 16-pin WQFN
  • Input voltage range:
    • 1.1V to 2.2V
  • Output voltage noise: 2.2µVRMS
  • 1.5% (max) accuracy over line, load, and temperature
  • Low dropout: 95mV(typ) at 3A
  • Power-supply rejection ratio (3A):
    • 80dB at 1kHz
    • 63dB at 10kHz
    • 51dB at 100kHz
    • 25dB at 1MHz
  • Adjustable output voltage range: 0.5V to 1.5V
  • Adjustable soft-start inrush control
  • Open-drain, power-good (PG) output
  • Package: 3mm × 3mm, 16-pin WQFN

Description

The TPS7N53 is a low-noise (2.2µVRMS), ultra-low-dropout linear regulator (LDO) capable of sourcing 3A with only 95mV of dropout (typ), independently of the output voltage. The device output voltage is adjustable from 0.5V to 1.5V using a single external resistor. The combination of low noise, high PSRR, and high output-current capability makes the TPS7N53 designed for powering noise-sensitive components (such as RF amplifiers, radar sensors, SERDES and analog chipsets) found in radar power, communication, and imaging applications.

Digital loads [such as application-specific integrated circuits (ASICs), field-programmable gate arrays (FPGAs), and digital signal processors (DSPs)] requiring low-input, low-output (LILO) voltage operation also benefit from the exceptional accuracy (1.5% over load, line, and temperature), remote sensing, excellent transient performance, and soft-start capabilities to provide optimal system performance. The versatility, performance, and small footprint solution make this LDO an excellent choice for high-current analog loads such as analog-to-digital converters (ADCs), digital-to-analog converters (DACs), and imaging sensors as well as digital loads such as serializers/deserializers (SerDes), FPGAs, and DSPs.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request