Product
0
TPS631013A
  • TPS631013A
  • TPS631013A

TPS631013A

ACTIVE

1.6V to 5.5V input voltage, 1.5A buck-boost converter with I2C and 1.2V logic I/O

Texas Instruments TPS631013A Product Info

1 April 2026 2

Parameters

Rating

Catalog

Topology

Buck-Boost

Vin (max) (V)

5.5

Vin (min) (V)

1.6

Vout (max) (V)

5.5

Vout (min) (V)

1

Switch current limit (typ) (A)

3

Features

Enable, I2C, Light-load efficiency, Load Disconnect, Synchronous rectification, UVLO fixed

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.000008

Duty cycle (max) (%)

90

Package

DSBGA (YBG)-8-1.752689 mm² 1.783 x 0.983

Features

  • 1.6V to 5.5V input voltage range
    • Device input voltage > 1.65V for start-up
  • 1.0V to 5.5V output voltage range(adjustable)
  • High output current capability, 3A peak switch current
    • 2A IOUT for VIN ≥ 3V, VOUT = 3.3V
    • 1.5A IOUT for VIN ≥ 2.7V, VOUT = 3.3V
  • High efficiency over the entire load range
    • 8µA typical quiescent current
    • Automatic power save mode and forced PWM mode configurable
  • Peak current buck-boost mode architecture
    • Seamless mode transition
    • Forward and reverse current operation
    • Start-up into pre-biased outputs
    • Fixed-frequency operation with 2MHz switching
  • Safety and robust operation features
    • Overcurrent protection and short-circuit protection
    • Integrated soft start with active ramp adoption
    • Overtemperature protection and overvoltage protection
    • True shutdown function with load disconnection
    • Forward and backward current limit
  • Support 1.2V logic I/O
  • Default setting of internal EN
    • TPS631012A and TPS631012XA(X=1,2,3): CONVERTER_EN = 0
    • TPS631013A: CONVERTER_EN = 1
  • Small solution size
    • Small 1µH inductor
    • 1.806mm × 0.908mm in WCSP
  • 1.6V to 5.5V input voltage range
    • Device input voltage > 1.65V for start-up
  • 1.0V to 5.5V output voltage range(adjustable)
  • High output current capability, 3A peak switch current
    • 2A IOUT for VIN ≥ 3V, VOUT = 3.3V
    • 1.5A IOUT for VIN ≥ 2.7V, VOUT = 3.3V
  • High efficiency over the entire load range
    • 8µA typical quiescent current
    • Automatic power save mode and forced PWM mode configurable
  • Peak current buck-boost mode architecture
    • Seamless mode transition
    • Forward and reverse current operation
    • Start-up into pre-biased outputs
    • Fixed-frequency operation with 2MHz switching
  • Safety and robust operation features
    • Overcurrent protection and short-circuit protection
    • Integrated soft start with active ramp adoption
    • Overtemperature protection and overvoltage protection
    • True shutdown function with load disconnection
    • Forward and backward current limit
  • Support 1.2V logic I/O
  • Default setting of internal EN
    • TPS631012A and TPS631012XA(X=1,2,3): CONVERTER_EN = 0
    • TPS631013A: CONVERTER_EN = 1
  • Small solution size
    • Small 1µH inductor
    • 1.806mm × 0.908mm in WCSP

Description

The TPS631012A and TPS631013A are constant frequency peak current mode control buck-boost converters in small wafer chip scale package. They have a 3A peak current limit (typical) and 1.6V to 5.5V input voltage range, and provide a power supply application for system pre-regulators and voltage stabilizers.

Depending on the input voltage, the TPS631012A and TPS631013A automatically operate in boost, buck, or in 3-cycle buck-boost mode when the input voltage is approximately equal to the output voltage. The transitions between modes happen at a defined duty cycle and avoid unwanted toggling within the modes to reduce output voltage ripple. 8µA quiescent current and power save mode enable the highest efficiency for light to no-load conditions.

The devices offer a small solution size in WCSP.

Subscribe to Welllinkchips !
Your Name
* Email
Popular Posts
Featured Parts More >
Submit a request
CONTACT US
Company address

WELL LINK CHIPS GROUP CO.,LIMITED FLAT/RM 1802 BEVERLY HOUSE 93-107 LOCKHART ROAD WANCHAI HK

Send Enquiry
SEND e-MAIL
Office hour from 9am to 6pm ,
Monday through Friday, UTC/GMT +8