0
TLV61070A
  • TLV61070A
  • TLV61070A

TLV61070A

ACTIVE

5-V 2-A boost converter with 0.5-V minimum input voltage

Texas Instruments TLV61070A Product Info

1 April 2026 8

Parameters

Rating

Catalog

Topology

Boost

Vin (max) (V)

5.5

Vin (min) (V)

0.5

Vout (max) (V)

5.5

Vout (min) (V)

2.2

Switch current limit (typ) (A)

2.5

Features

Load Disconnect, Synchronous rectification

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.00002

Duty cycle (max) (%)

97

Package

SOT-23 (DBV)-6-8.12 mm² 2.9 x 2.8

Features

  • Input voltage range: 0.5 V to 5.5 V
  • 1.3-V minimum input voltage for start-up
  • Output voltage setting range: 2.2 V to 5.5 V
  • Two 69-mΩ (LS) / 89-mΩ (HS) MOSFETs
  • 2.5-A valley switching current limit
  • 92.3% efficiency at VIN = 3.6 V, VOUT = 5 V and IOUT = 1.0 A
  • 1-MHz switching frequency when VIN > 1.5 V and 0.55-MHz switching frequency when VIN < 1 V
  • Typical 0.1-µA shutdown current from VIN and SW
  • ±2.5% reference voltage accuracy over –40°C to +125°C
  • Auto PFM operation mode at light load
  • Pass-through mode when VIN > VOUT
  • True disconnection between input and output during shutdown
  • Output overvoltage and thermal shutdown protections
  • Output short-circuit protection
  • 2.9-mm × 1.6-mm SOT23-6 (DDC) 6-pin package
  • Input voltage range: 0.5 V to 5.5 V
  • 1.3-V minimum input voltage for start-up
  • Output voltage setting range: 2.2 V to 5.5 V
  • Two 69-mΩ (LS) / 89-mΩ (HS) MOSFETs
  • 2.5-A valley switching current limit
  • 92.3% efficiency at VIN = 3.6 V, VOUT = 5 V and IOUT = 1.0 A
  • 1-MHz switching frequency when VIN > 1.5 V and 0.55-MHz switching frequency when VIN < 1 V
  • Typical 0.1-µA shutdown current from VIN and SW
  • ±2.5% reference voltage accuracy over –40°C to +125°C
  • Auto PFM operation mode at light load
  • Pass-through mode when VIN > VOUT
  • True disconnection between input and output during shutdown
  • Output overvoltage and thermal shutdown protections
  • Output short-circuit protection
  • 2.9-mm × 1.6-mm SOT23-6 (DDC) 6-pin package

Description

TLV61070A device is a synchronous boost converter with 0.5-V ultra-low input voltage. The device provides a power supply solution for portable equipment and smart devices powered by various batteries and super capacitors. The TLV61070A has typical 2.5-A valley switch current limit over full temperature range. With a wide input voltage range of 0.5 V to 5.5 V, the TLV61070A supports super capacitor backup power applications, which may deeply discharge the super capacitor.

The TLV61070A operates at 1-MHz switching frequency when the input voltage is above 1.5 V. The switching frequency decreases gradually to 0.55 MHz when the input voltage is below 1.5 V down to 1 V. The TLV61070A enters power-save mode at light load condition to maintain high efficiency over the entire load current range. The TLV61070A consumes a 20-µA quiescent current from VOUT in light load condition. During shutdown, the TLV61070A is completely disconnected from the input power and only consumes a 0.1-µA current to achieve long battery life. The TLV61070A has 5.7-V output overvoltage protection, output short circuit protection, and thermal shutdown protection.

The TLV61070A offers a very small solution size with 2.9-mm × 1.6-mm SOT23-6 (DBV) package and minimum amount of external components.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request