0
SN74CBTLV16210
  • SN74CBTLV16210
  • SN74CBTLV16210
  • SN74CBTLV16210

SN74CBTLV16210

ACTIVE

3.3-V, 1:1 (SPST), 20-channel FET bus switch

Texas Instruments SN74CBTLV16210 Product Info

1 April 2026 4

Parameters

Protocols

Analog

Configuration

1:1 SPST

Number of channels

20

Bandwidth (MHz)

200

Supply voltage (max) (V)

3.6

Ron (typ) (mΩ)

5000

Input/output voltage (min) (V)

0

Input/output voltage (max) (V)

3.6

Operating temperature range (°C)

-40 to 85

Input/output continuous current (max) (mA)

128

COFF (typ) (pF)

6.5

OFF-state leakage current (max) (µA)

1

Ron (max) (mΩ)

40000

VIH (min) (V)

2

VIL (max) (V)

0.8

Rating

Catalog

Package

SSOP (DL)-48-164.358 mm² 15.88 x 10.35

Features

  • Member of the Texas Instruments Widebus™ Family
  • 5- Switch Connection Between Two Ports
  • Rail-to-Rail Switching on Data I/O Ports
  • Ioff Supports Parital-Power-Down Mode

Widebus is a trademark of Texas Instruments.

  • Member of the Texas Instruments Widebus™ Family
  • 5- Switch Connection Between Two Ports
  • Rail-to-Rail Switching on Data I/O Ports
  • Ioff Supports Parital-Power-Down Mode

Widebus is a trademark of Texas Instruments.

Description

The SN74CBTLV16210 provides 20 bits of high-speed bus switching. The low on-state resistance of the switch allows connections to be made with minimal propagation delay.

The device is organized as dual 10-bit bus switches with separate output-enable (OE) inputs. It can be used as two 10-bit bus switches or as one 20-bit bus switch. When OE is low, the associated 10-bit bus switch is on, and port A is connected to port B. When OE is high, the switch is open, and the high-impedance state exists between the two ports.

This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.

To ensure the high-impedance state during power up or power down, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request