0
LP2989LV
  • LP2989LV
  • LP2989LV
  • LP2989LV
  • LP2989LV
  • LP2989LV

LP2989LV

ACTIVE

500-mA, 16-V, low-dropout voltage regulator with power good

Texas Instruments LP2989LV Product Info

1 April 2026 6

Parameters

Rating

Catalog

Vin (max) (V)

16

Vin (min) (V)

2.1

Iout (max) (A)

0.5

Output options

Fixed Output

Vout (max) (V)

1.8

Vout (min) (V)

1.8

Fixed output options (V)

1.8

Noise (µVrms)

18

PSRR at 100 KHz (dB)

32

Iq (typ) (mA)

0.11

Features

Enable, Power good

Thermal resistance θJA (°C/W)

35, 114

Load capacitance (min) (µF)

10

Regulated outputs (#)

1

Accuracy (%)

1.6

Dropout voltage (Vdo) (typ) (mV)

160

Operating temperature range (°C)

-40 to 125

Package

SOIC (D)-8-29.4 mm² 4.9 x 6

Features

  • 2.1-V to 16-V Input Voltage Range
  • Ultra-Low Dropout Voltage
  • 500-mA Continuous Output Current
  • Very Low Output Noise With External Capacitor
  • < 0.8-µA Quiescent Current When Shut Down
  • Low Ground Pin Current at All Loads
  • 0.75% Output Voltage Accuracy (A Grade)
  • High Peak Current Capability (800-mA typical)
  • Overtemperature and Overcurrent Protection
  • −40°C to +125°C Junction Temperature Range
  • 2.1-V to 16-V Input Voltage Range
  • Ultra-Low Dropout Voltage
  • 500-mA Continuous Output Current
  • Very Low Output Noise With External Capacitor
  • < 0.8-µA Quiescent Current When Shut Down
  • Low Ground Pin Current at All Loads
  • 0.75% Output Voltage Accuracy (A Grade)
  • High Peak Current Capability (800-mA typical)
  • Overtemperature and Overcurrent Protection
  • −40°C to +125°C Junction Temperature Range

Description

The LP2989LV is a fixed-output 500-mA precision LDO regulator designed for use with ceramic output capacitors.

Output noise can be reduced to 18 µV (typical) by connecting an external 10-nF capacitor to the bypass pin.

Using an optimized Vertically Integrated PNP (VIP) process, the LP2989LV delivers superior performance:

Ground Pin Current: Typically 3 mA at 500-mA load, and 110 µA at 100-µA load.

Sleep Mode: The LP2989LV draws less than 0.8-µA quiescent current when SHUTDOWN pin is pulled low.

ERROR Flag: The built-in ERROR flag goes low when the output drops approximately 5% below nominal.

Precision Output: Output voltage accuracy is 0.75% (A grade) and 1.25% (standard grade) at room temperature.

For output voltages greater than or equal to 2 V, see the LP2989 (SNVS083) data sheet.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request