0
F28E120SB
  • F28E120SB
  • F28E120SB

F28E120SB

PREVIEW

C2000™ 32-bit MCU with 160 MHz, 64KB flash, FPU, PGA

Texas Instruments F28E120SB Product Info

1 April 2026 5

Parameters

CPU

1 C28

Frequency (MHz)

160

Flash memory (kByte)

64

RAM (kByte)

16

ADC type

12-bit ADC

Total processing (MIPS)

160

Features

32-bit CPU timers, Dual security zones, FPU32, Programmable gain amplifier, Watchdog timer

UART

3

CAN (#)

0

PWM (Ch)

8

TI functional safety category

Functional Safety-Compliant

Number of ADC channels

10, 17

Direct memory access (Ch)

2

SPI

1

QEP

1

USB

No

Hardware accelerators

Floating point unit

Edge AI enabled

Yes

Operating temperature range (°C)

-40 to 105

Rating

Catalog

Communication interface

I2C, SCI, SPI, UART

Operating system

BareMetal (No OS), FreeRTOS

Nonvolatile memory (kByte)

64

Number of GPIOs

24, 26, 36

Number of I2Cs

1

Package

VQFN (RHB)-32-25 mm² 5 x 5

Features

  • Real-time processing
  • On-chip memory
    • Up to 128KB (64KW) of single bank flash (ECC-protected)
    • 16KB (8KW) of RAM (Parity-protected)
    • Security
      • JTAGLOCK
      • Zero-pin boot
      • Dual-zone security
  • Clock and system control
    • Internal 32MHz oscillator with up to ±2% accuracy (SYSOSC)
    • Crystal oscillator or external clock input
    • Windowed watchdog timer module
    • Missing clock detection circuitry
    • Dual-clock Comparator (DCC)
  • 3.3V I/O design
    • Brownout reset (BOR) circuit
  • System peripherals
    • 27 individually programmable multiplexed General-Purpose Input/Output (GPIO) pins (8 shared with Analog)
    • 9 digital inputs on analog pins
    • One 2-channel Direct Memory Access (DMA) controller
    • Enhanced Peripheral Interrupt Expansion (ePIE)
    • Multiple low-power mode (LPM) support
    • Unique Identification (UID) number
  • Communications peripherals
    • One Inter-integrated Circuit (I2C) interface
    • One high-speed (20Mbps) Universal Asynchronous Receiver/Transmitter (UART)

    • One Serial Peripheral Interface (SPI) port
    • Two UART-compatible Serial Communication Interfaces (SCIs)
  • Analog system
    • One 8.9 MSPS, 12-bit Analog-to-Digital Converter (ADC)
      • Up to 17 external channels (8 shared with GPIO)
      • Three integrated Post-Processing Blocks (PPB)
    • Three windowed comparators (CMPSS_LITE) with 10-bit effective reference DACs
      • Digital glitch filters
      • One DAC output (CMP3_LITE_DACL) available on a pin
    • One Programmable Gain Amplifier (PGA)
      • Unity gain support
      • Inverting and non-inverting gain mode support
      • Inputs with 3-to-1 multiplexer
      • Programmable output filtering
  • Enhanced control peripherals
    • 2 MCPWM modules, 8 total PWM channels (one 6-channel MCPWM module and one 2-channel module)
    • One Enhanced Capture (eCAP) module
    • One Enhanced Quadrature Encoder Pulse (eQEP) module with support for CW/CCW operation modes
  • CMAC Keys (128-bit) for SW AES
  • Package options:
    • 48-pin Low-Profile Quad Flat Pack (LQFP) [PT suffix]
    • 32-pin Low-Profile Quad Flat Pack (LQFP) [VFC suffix]
    • 32-pin Very Thin Quad Flatpack No-Lead (VQFN) [RHB suffix]
  • Temperature options:
    • Junction (TJ): –40°C to 125°C
  • Real-time processing
  • On-chip memory
    • Up to 128KB (64KW) of single bank flash (ECC-protected)
    • 16KB (8KW) of RAM (Parity-protected)
    • Security
      • JTAGLOCK
      • Zero-pin boot
      • Dual-zone security
  • Clock and system control
    • Internal 32MHz oscillator with up to ±2% accuracy (SYSOSC)
    • Crystal oscillator or external clock input
    • Windowed watchdog timer module
    • Missing clock detection circuitry
    • Dual-clock Comparator (DCC)
  • 3.3V I/O design
    • Brownout reset (BOR) circuit
  • System peripherals
    • 27 individually programmable multiplexed General-Purpose Input/Output (GPIO) pins (8 shared with Analog)
    • 9 digital inputs on analog pins
    • One 2-channel Direct Memory Access (DMA) controller
    • Enhanced Peripheral Interrupt Expansion (ePIE)
    • Multiple low-power mode (LPM) support
    • Unique Identification (UID) number
  • Communications peripherals
    • One Inter-integrated Circuit (I2C) interface
    • One high-speed (20Mbps) Universal Asynchronous Receiver/Transmitter (UART)

    • One Serial Peripheral Interface (SPI) port
    • Two UART-compatible Serial Communication Interfaces (SCIs)
  • Analog system
    • One 8.9 MSPS, 12-bit Analog-to-Digital Converter (ADC)
      • Up to 17 external channels (8 shared with GPIO)
      • Three integrated Post-Processing Blocks (PPB)
    • Three windowed comparators (CMPSS_LITE) with 10-bit effective reference DACs
      • Digital glitch filters
      • One DAC output (CMP3_LITE_DACL) available on a pin
    • One Programmable Gain Amplifier (PGA)
      • Unity gain support
      • Inverting and non-inverting gain mode support
      • Inputs with 3-to-1 multiplexer
      • Programmable output filtering
  • Enhanced control peripherals
    • 2 MCPWM modules, 8 total PWM channels (one 6-channel MCPWM module and one 2-channel module)
    • One Enhanced Capture (eCAP) module
    • One Enhanced Quadrature Encoder Pulse (eQEP) module with support for CW/CCW operation modes
  • CMAC Keys (128-bit) for SW AES
  • Package options:
    • 48-pin Low-Profile Quad Flat Pack (LQFP) [PT suffix]
    • 32-pin Low-Profile Quad Flat Pack (LQFP) [VFC suffix]
    • 32-pin Very Thin Quad Flatpack No-Lead (VQFN) [RHB suffix]
  • Temperature options:
    • Junction (TJ): –40°C to 125°C

Description

The F28E12x is a member of the C2000™ real-time microcontroller family of scalable, ultra-low latency devices designed for efficiency in motor drive applications.

The real-time control subsystem is based on TI’s 32-bit C28x DSP core, which provides 160MHz of signal-processing performance for fixed-point code running from either on-chip flash or SRAM.

The F28E12x supports up to 128KB (64KW) of flash memory. Up to 16KB (8KW) of on-chip SRAM is also available to supplement the flash memory.

High-performance analog blocks are integrated into the F28E12x real-time microcontroller (MCU) and are closely coupled with the processing and PWM units to provide optimal real-time signal chain performance. Eight PWM channels enable control of various power stages from a 3-phase inverter to power-factor correction and other advanced multilevel power topologies.

Interfacing is supported through various industry-standard communication ports (such as SPI, SCI, I2C, and UART) and offers multiple pin-muxing options for optimal signal placement.

Want to learn more about features that make C2000 MCUs the right choice for your real-time control system? Check out The Essential Guide for Developing With C2000™ Real-Time Microcontrollers and visit the C2000 real-time microcontrollers page.

The Getting Started With C2000™ Real-Time Control Microcontrollers (MCUs) Getting Started Guide covers all aspects of development with C2000 devices from hardware to support resources. In addition to key reference documents, each section provides relevant links and resources to further expand on the information covered.

Ready to get started? Check out the LAUNCHXL-F28E12X development kit and download C2000Ware.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request