- RF section
- Single-Chip 2.4-GHz RF Transceiver and MCU
- Supports 250 kbps, 500 kbps, 1 Mbps and 2 Mbps data rates
- Excellent Link Budget, Enabling Long Range Without External
Front-Ends - Programmable Output Power up to 5 dBm
- Excellent Receiver Sensitivity (–90 dBm at 2 Mbps,
–98 dBm at 250 kbps) - Suitable for Systems Targeting Compliance With Worldwide
Radio Frequency Regulations: ETSI EN 300 328 and EN 300
440 Category 2 (Europe), FCC CFR47 Part 15 (US), and
ARIB STD-T66 (Japan) - Accurate RSSI Function
- Layout
- Few External Components
- Pin Out Suitable for Single Layer PCB Applications
- Reference Designs Available
- 32-pin 5-mm × 5-mm QFN (16 General I/O Pins)
Package
- Low Power
- Active Mode RX Best Performance: 21.2 mA
- Active Mode TX (0 dBm): 26 mA
- Power Mode 1 (5 µs Wake-Up): 235 µA
- Power mode 2 (sleep timer on): 0.9 µA
- Power mode 3 (External interrupts): 0.4µA
- Wide Supply Voltage Range (2V to 3.6V)
- Full RAM and Register Retention in All Power Modes
- Microcontroller
- High-Performance and Low-Power 8051
Microcontroller Core With Code Prefetch - 32-KB Flash Program Memory
- 1 KB SRAM
- Hardware Debug Support
- Extensive Baseband Automation, Including
Auto-Acknowledgement and Address Decoding
- Peripherals
- Two-Channel DMA with Access to all Memory
Areas and Peripherals - General-Purpose Timers (One 16-Bit, Two 8-Bit)
- Radio Timer, 40-Bit
- IR Generation Circuitry
- Several Oscillators:
- 32MHz XOSC
- 16MHz RCOSC
- 32kHz RCOSC
- 32-kHz Sleep Timer With Capture
- AES Security Coprocessor
- UART/SPI/I2C Serial Interface
- 16 General-Purpose I/O pins (3 × 20-mA Drive Strength,
Remaining pins have 4 mA Drive Strength) - Watchdog Timer
- True Random-Number Generator
- ADC and Analog Comparator
- RF section
- Single-Chip 2.4-GHz RF Transceiver and MCU
- Supports 250 kbps, 500 kbps, 1 Mbps and 2 Mbps data rates
- Excellent Link Budget, Enabling Long Range Without External
Front-Ends - Programmable Output Power up to 5 dBm
- Excellent Receiver Sensitivity (–90 dBm at 2 Mbps,
–98 dBm at 250 kbps) - Suitable for Systems Targeting Compliance With Worldwide
Radio Frequency Regulations: ETSI EN 300 328 and EN 300
440 Category 2 (Europe), FCC CFR47 Part 15 (US), and
ARIB STD-T66 (Japan) - Accurate RSSI Function
- Layout
- Few External Components
- Pin Out Suitable for Single Layer PCB Applications
- Reference Designs Available
- 32-pin 5-mm × 5-mm QFN (16 General I/O Pins)
Package
- Low Power
- Active Mode RX Best Performance: 21.2 mA
- Active Mode TX (0 dBm): 26 mA
- Power Mode 1 (5 µs Wake-Up): 235 µA
- Power mode 2 (sleep timer on): 0.9 µA
- Power mode 3 (External interrupts): 0.4µA
- Wide Supply Voltage Range (2V to 3.6V)
- Full RAM and Register Retention in All Power Modes
- Microcontroller
- High-Performance and Low-Power 8051
Microcontroller Core With Code Prefetch - 32-KB Flash Program Memory
- 1 KB SRAM
- Hardware Debug Support
- Extensive Baseband Automation, Including
Auto-Acknowledgement and Address Decoding
- Peripherals
- Two-Channel DMA with Access to all Memory
Areas and Peripherals - General-Purpose Timers (One 16-Bit, Two 8-Bit)
- Radio Timer, 40-Bit
- IR Generation Circuitry
- Several Oscillators:
- 32MHz XOSC
- 16MHz RCOSC
- 32kHz RCOSC
- 32-kHz Sleep Timer With Capture
- AES Security Coprocessor
- UART/SPI/I2C Serial Interface
- 16 General-Purpose I/O pins (3 × 20-mA Drive Strength,
Remaining pins have 4 mA Drive Strength) - Watchdog Timer
- True Random-Number Generator
- ADC and Analog Comparator