0
MAX14611
  • MAX14611

MAX14611

PRODUCTION

Quad Bidirectional Low-Voltage Logic-Level Translator Quad-Channel Bidirectional Logic-Level Translator Is Optimized for I²C and MDIO Buses

Analog Devices MAX14611 Product Info

10 February 2026 6

Features

  • Improved Interoperability
    • Meets I²C Specifications
    • 10kΩ Internal Pullup Resistor
    • Pin-to-Pin Compatible with the MAX3377E and the MAX3378E
    • 0.9V Operation on Low Voltage Supply
  • Robust Logic-Level Translation
    • ±0.5V Tolerances on All Pins
    • ±6kV Human Body Model ESD Protection on I/OVCC_ Lines
    • Thermal Short-Circuit Protection
    • Short to Ground Fault Protection on All Pins
    • -40°C to +85°C Operating Temperature Range
  • Increased Design Flexibility
    • Ultra-Low Supply Current
    • Pullup Resistor Enabled with a Single Power Supply when Active-Low TS = High
    • 10Ω (max) Transmission Gate FET
    • Small, 14-Pin, 3.0mm x 3.0mm TDFN Package and 14-Pin, 4.9mm x 5.1mm TSSOP Package

Part details & applications

The MAX14611 is a quad bidirectional logic-level translator that provides the level shifting necessary to allow data transfer in a multivoltage system. Externally applied voltages, VCC and VL, set the logic levels on either side of the device. A low-voltage logic signal present on the VL side of the device appears as a high-voltage logic signal on the VCC side of the device, and vice-versa.

The device is ideal for I²C bus as well as MDIO bus applications where open-drain operation is often required. The device features a three-state output mode (active-low TS). Drive active-low TS high to connect the pullup to the powered I/O port. This allows for continuous, undisrupted I²C operation on the powered side of the device while the level translation function is off. The MAX14611 is a pin-to-pin compatible upgrade to the MAX3378E in the TDFN package.

The MAX14611 features enhanced high-electrostatic-discharge (ESD) protection on all I/OVCC_ ports up to ±6kV HBM. The device operates over the -40°C to +85°C extended temperature range and is available in 3mm x 3mm, 14-pin TDFN and 4.9mm x 5.1mm, 14-pin TSSOP packages.

Applications

  • Low-Voltage ASIC Level Translation
  • Mobile Phones
  • Portable Electronics
  • POS Systems
  • SPI, I²C, and MDIO Level Translation
  • Telecommunications Equipment

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request