Product
0
UCC57142
  • UCC57142
  • UCC57142
  • UCC57142

UCC57142

ACTIVE

Single-channel 30V VDD, 3A/3A low-side driver with negative OC protection and 12V UVLO

Texas Instruments UCC57142 Product Info

1 April 2026 0

Parameters

Number of channels

1

Power switch

IGBT, MOSFET, SiCFET

Peak output current (A)

3

Input supply voltage (min) (V)

10

Input supply voltage (max) (V)

26

Features

Short circuit protection, Soft turn-off

Operating temperature range (°C)

-40 to 125

Rise time (ns)

8

Fall time (ns)

14

Channel input logic

Non-Inverting

Rating

Catalog

Undervoltage lockout (typ) (V)

12

Driver configuration

Single

Package

SOT-23 (DBV)-6-8.12 mm² 2.9 x 2.8

Features

  • Typical 3A sink 3A source output currents
  • -250mV over current protection (OCP) threshold
  • Single pin for fault output and enable
  • Programmable fault clear time and over current detection response time
  • Absolute maximum VDD voltage: 30V
  • Tight UVLO threshold for bias flexibility
  • Typical 26ns propagation delay
  • Self-protected driver with thermal shutdown function at 180°C
  • Available in 2.9mm x 1.6mm SOT-23 package
  • Operating junction temperature range of –40°C to 150°C
  • Typical 3A sink 3A source output currents
  • -250mV over current protection (OCP) threshold
  • Single pin for fault output and enable
  • Programmable fault clear time and over current detection response time
  • Absolute maximum VDD voltage: 30V
  • Tight UVLO threshold for bias flexibility
  • Typical 26ns propagation delay
  • Self-protected driver with thermal shutdown function at 180°C
  • Available in 2.9mm x 1.6mm SOT-23 package
  • Operating junction temperature range of –40°C to 150°C

Description

The UCC5714x is a single channel, high-performance, low-side gate driver capable of effectively driving MOSFET, IGBT and SiC power switches. The UCC5714x has a typical peak drive strength of 3A.

The UCC5714x provides the over current protection with the OCP pin. When the over current signal is detected on the OCP pin, the internal circuit will pull down the EN/FLT pin to report fault and force the OUT to low stage. An external pullup circuit on the EN/FLT is required during the normal operation of the driver. Pulling the EN/FLT low will disable the driver. The EN/FLT would also report the under voltage lock out (UVLO) fault on VDD and the over temperature fault. The UCC5714x provide both 8V and 12V UVLO options for SiC and IGBT applications.

The UCC5714x is a single channel, high-performance, low-side gate driver capable of effectively driving MOSFET, IGBT and SiC power switches. The UCC5714x has a typical peak drive strength of 3A.

The UCC5714x provides the over current protection with the OCP pin. When the over current signal is detected on the OCP pin, the internal circuit will pull down the EN/FLT pin to report fault and force the OUT to low stage. An external pullup circuit on the EN/FLT is required during the normal operation of the driver. Pulling the EN/FLT low will disable the driver. The EN/FLT would also report the under voltage lock out (UVLO) fault on VDD and the over temperature fault. The UCC5714x provide both 8V and 12V UVLO options for SiC and IGBT applications.

Subscribe to Welllinkchips !
Your Name
* Email
Popular Posts
Featured Parts More >
Submit a request
CONTACT US
Company address

WELL LINK CHIPS GROUP CO.,LIMITED FLAT/RM 1802 BEVERLY HOUSE 93-107 LOCKHART ROAD WANCHAI HK

Send Enquiry
SEND e-MAIL
Office hour from 9am to 6pm ,
Monday through Friday, UTC/GMT +8