0
UCC28730-Q1
  • UCC28730-Q1

UCC28730-Q1

ACTIVE

Zero-power standby PSR flyback controller for automotive

Texas Instruments UCC28730-Q1 Product Info

1 April 2026 4

Parameters

Topology

Buck, Flyback

Control mode

Primary-side regulation

Features

Automotive qualified, Current limiting, DCM, Green mode, High-voltage startup, Input line monitor, Leading edge blanking, Light load efficiency, Low power, Overcurrent protection, Overtemperature protection, Primary-side regulated, Quasi-Resonant, Soft start, Thermal shutdown, Valley switching

Package

SOIC (D)-7-29.4 mm² 4.9 x 6

Features

  • AEC-Q100 Qualified for Automotive Applications:
    • Device Temperature Grade 1: –40⁰C to +125⁰C
    • Device HBM Classification Level 2: ±2 kV
    • Device CDM Classification Level C4B: ±750 V
  • Functional Safety-Capable
  • Enables Zero-Power (< 5 mW) Standby Consumption
  • Primary-Side Regulation (PSR) Eliminates Opto-coupler
  • ±5% Voltage Regulation and Current Regulation Across Line and Load
  • 700-V Start-up Switch with 30-V Minimum Start-up Voltage
  • 83-kHz Maximum Switching Frequency Enables Low Stand-by Power Charger Designs
  • Resonant-Ring Valley-Switching Operation for Highest Overall Efficiency
  • Frequency-Dither to Ease EMI Compliance
  • Clamped Gate-Drive Output for MOSFET
  • Over-Voltage, Low-Line, and Over-Current Protection Functions
  • Programmable Cable Compensation
  • SOIC-7 Package
  • AEC-Q100 Qualified for Automotive Applications:
    • Device Temperature Grade 1: –40⁰C to +125⁰C
    • Device HBM Classification Level 2: ±2 kV
    • Device CDM Classification Level C4B: ±750 V
  • Functional Safety-Capable
  • Enables Zero-Power (< 5 mW) Standby Consumption
  • Primary-Side Regulation (PSR) Eliminates Opto-coupler
  • ±5% Voltage Regulation and Current Regulation Across Line and Load
  • 700-V Start-up Switch with 30-V Minimum Start-up Voltage
  • 83-kHz Maximum Switching Frequency Enables Low Stand-by Power Charger Designs
  • Resonant-Ring Valley-Switching Operation for Highest Overall Efficiency
  • Frequency-Dither to Ease EMI Compliance
  • Clamped Gate-Drive Output for MOSFET
  • Over-Voltage, Low-Line, and Over-Current Protection Functions
  • Programmable Cable Compensation
  • SOIC-7 Package

Description

The UCC28730-Q1 isolated-flyback power supply controller provides constant-voltage (CV) and constant-current (CC) output regulation without the use of an optical coupler. A minimum switching frequency of 30 Hz achieves less than 5 mW of no-load power.

This device processes information from the primary power switch and an auxiliary flyback winding for precise control of output voltage and current.

An internal 700-V start-up switch, dynamically- controlled operating states and a tailored modulation profile support ultra-low stand-by power without sacrificing start-up time or output transient response. Control algorithms in the UCC28730-Q1 allow operating efficiencies to meet or exceed applicable standards. Discontinuous conduction mode (DCM) operation with valley-switching reduces switching losses. Modulation of the switching frequency and primary current peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request