0
TPSM8D7420
  • TPSM8D7420

TPSM8D7420

ACTIVE

4V to 17V, current mode, dual, 4A stackable step-down power module

Texas Instruments TPSM8D7420 Product Info

1 April 2026 5

Parameters

Rating

Catalog

Topology

Buck, Synchronous Buck

Iout (max) (A)

4, 8

Vin (max) (V)

17

Vin (min) (V)

4

Vout (max) (V)

11

Vout (min) (V)

0.6

Features

Adjustable soft start, Adjustable switching frequency, Enable, External Sync, Frequency synchronization, Overcurrent protection, Overvoltage protection, Phase Interleaving, Power good, Stackable, UVLO, Undervoltage protection

Operating temperature range (°C)

-40 to 125

Type

Module

Duty cycle (max) (%)

92

Control mode

current mode control

Switching frequency (min) (kHz)

400

Switching frequency (max) (kHz)

2200

Package

FCCSP (APT)-56-44.8 mm² 7 x 6.4

Features

  • Fixed-frequency, peak current mode (PCM) control
  • Small form factor 6.4mm x 7.0mm x 2.4mm, overmolded BGA power module
  • Two independent synchronous buck outputs
  • Supports 2-phase stackability for higher output current
  • High-efficiency, integrated MOSFETs, inductor, and basic passives.
  • 4V to 17V input voltage range
  • 0.6V to 11V output voltage range
  • Selectable internal or external compensation
  • Continuously adjustable switching frequency from 400kHz to 2.2MHz
  • Synchronizable to an external clock
  • 0.6V, ±0.75% voltage reference accuracy over the full temperature range
  • Sequencing features
    • Enable with adjustable input UVLO
    • Power-good output monitor
    • Output discharge
    • Monotonic start-up into prebiased outputs
    • Adjustable soft-start time with external SS pin
  • Output overvoltage (OV), undervoltage (UV), overcurrent (OC), and thermal shutdown protection
  • Analog temperature output on the MSEL pin
  • –40°C to 125°C module temperature range
  • Create a custom design using TPSM8D7x20 with the WEBENCH® Power Designer
  • Fixed-frequency, peak current mode (PCM) control
  • Small form factor 6.4mm x 7.0mm x 2.4mm, overmolded BGA power module
  • Two independent synchronous buck outputs
  • Supports 2-phase stackability for higher output current
  • High-efficiency, integrated MOSFETs, inductor, and basic passives.
  • 4V to 17V input voltage range
  • 0.6V to 11V output voltage range
  • Selectable internal or external compensation
  • Continuously adjustable switching frequency from 400kHz to 2.2MHz
  • Synchronizable to an external clock
  • 0.6V, ±0.75% voltage reference accuracy over the full temperature range
  • Sequencing features
    • Enable with adjustable input UVLO
    • Power-good output monitor
    • Output discharge
    • Monotonic start-up into prebiased outputs
    • Adjustable soft-start time with external SS pin
  • Output overvoltage (OV), undervoltage (UV), overcurrent (OC), and thermal shutdown protection
  • Analog temperature output on the MSEL pin
  • –40°C to 125°C module temperature range
  • Create a custom design using TPSM8D7x20 with the WEBENCH® Power Designer

Description

The TPSM8D7x20 is a power-dense dual-channel buck power module designed to provide efficient and reliable power conversion for a wide output voltage range from 0.6V to 11V. The module integrates MOSFETs, inductor, and select capacitors to reduce board space and layout complexity. The module can be configured into both multiphase and multi-output rails by supporting 2-phase stackability with interleaved phases. Under steady-state conditions the module operates in FCCM with a fixed-frequency that is resistor adjustable from 400kHz to 2.2MHz and synchronizable to an external clock.

TPSM8D7x20 module employs current mode control with internal and external compensation. Sequencing requirements are easily met with the external soft-start, active output discharge, adjustable EN, and power-good features. A full suite of protection features (output OV and UV, input UVLO, TSD, OC) are also included for robustness.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request