0
TPSM82843
  • TPSM82843
  • TPSM82843

TPSM82843

ACTIVE

275nA IQ, 0.4V to 3.6V selectable VOUT, 600mA step-down converter module with integrated inductor

Texas Instruments TPSM82843 Product Info

1 April 2026 5

Parameters

Rating

Catalog

Topology

Buck, Step-Down Converter, Synchronous Buck

Iout (max) (A)

0.6

Vin (max) (V)

5.5

Vin (min) (V)

1.8

Vout (max) (V)

3.6

Vout (min) (V)

0.4

Features

1% accuracy, Enable, Light load efficiency, Output discharge, Over Current Protection, Pre-Bias Start-Up, Synchronous Rectification

EMI features

Low parasitic Hotrod packaging

Operating temperature range (°C)

-40 to 125

Switch current limit (typ) (A)

1.1

Type

Converter (Integrated Switch), DC/DC converter, Module

Duty cycle (max) (%)

100

Control mode

COT, Constant on-time (COT), DCS-Control

Switching frequency (min) (kHz)

1500

Switching frequency (max) (kHz)

1500

Package

QFN-FCMOD (VCF)-7-6.615 mm² 2.45 x 2.7

Features

  • 1.8V to 5.5V input voltage range
  • 0.4V to 3.6V output voltage range
  • 275nA typical quiescent current, 4nA shutdown
  • Zero feedback error from integrated output divider
  • 1.2V logic compliant EN (Enable) pin
  • 600mA output current and output discharge
  • 1% accurate voltage selection with single resistor on VSET-pin
    • TPSM828436: 0.4V to 0.8V
    • TPSM828437: 0.8V to 1.8V
    • TPSM828438: 1.8V to 3.6V
  • Cost and size optimized passive components
    • Down to 4.7µF CIN and COUT
    • 0402 and 0201 capacitors supported
  • Low output voltage ripple in power save mode
  • RF-friendly and fast transient DCS-Control
  • Automatic transition to no ripple 100% mode
  • Small QFN package with 2.45mm × 2.70mm × 1.29mm
  • 1.8V to 5.5V input voltage range
  • 0.4V to 3.6V output voltage range
  • 275nA typical quiescent current, 4nA shutdown
  • Zero feedback error from integrated output divider
  • 1.2V logic compliant EN (Enable) pin
  • 600mA output current and output discharge
  • 1% accurate voltage selection with single resistor on VSET-pin
    • TPSM828436: 0.4V to 0.8V
    • TPSM828437: 0.8V to 1.8V
    • TPSM828438: 1.8V to 3.6V
  • Cost and size optimized passive components
    • Down to 4.7µF CIN and COUT
    • 0402 and 0201 capacitors supported
  • Low output voltage ripple in power save mode
  • RF-friendly and fast transient DCS-Control
  • Automatic transition to no ripple 100% mode
  • Small QFN package with 2.45mm × 2.70mm × 1.29mm

Description

The high efficiency TPSM82843x step-down converter family supports an ultra-low IQ (typical operating quiescent current) of 275nA and a typical shutdown current of only 4nA. The inductor is integrated into the QFN package improving ease of use and reducing the bill of material down to only three passive components.

The RF-friendly device uses DCS-Control for a low output voltage ripple. The device is designed to power wireless applications like Wi-Fi or Bluetooth. The device switches at 1.5MHz and has high efficiency even at light load current down to 10µA for long battery life and easy thermal management. Humidity, temperature or vibration have no influence on the output voltage accuracy due to the integrated feedback divider. Therefore, the device is also an excellent choice for industrial point of load applications.

18 predefined output voltages per part number with 1% accuracy selected through a standard E48 (2%) or E96 (1%) resistor on the VSET pin support a large variety of applications.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request