- Total ionizing dose (TID) characterized
- Radiation hardness assurance (RHA) availability of up to 100krad(Si)
- Single-Event Effects (SEE) characterized
- Single-event latchup (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune up to linear energy transfer (LET) = 75MeV-cm2/mg
- Single-event functional interrupt (SEFI) and single-event transient (SET) characterized up to LET = 75MeV-cm2/mg
- Input voltage range from 4.5V to 14V
- 12A maximum output current
- High efficiency (typical values for VIN = 12V, VOUT = 3.3V, fSW = 500kHz)
- 91% (CFP), 91% (plastic) at 2A
- 87% (CFP), 88% (plastic) at 9A
- 85% (CFP), 86% (plastic) at 12A
- Integrated HS 45mΩ(CFP)/31mΩ(plastic) and LS 33mΩ(CFP)/27mΩ(plastic) MOSFETs (typ at 12V)
- Flexible switching frequency options:
- 100kHz to 1MHz, accurate (±15% or better), adjustable internal oscillator
- 100kHz to 1MHz external sync capability
- SYNC pins can be configured 90° out of phase to parallel up to 4 devices
- 0.6V ±0.67% (CFP), ±0.83% (plastic) voltage reference over line, temperature, and radiation
- Differential remote sensing
- Selectable current limit
- FAULT input pin for flexible fault management
- Monotonic start-up into prebiased outputs
- Adjustable slope compensation and soft-start
- Adjustable input enable and power-good output for power sequencing
- Power-good output monitor for undervoltage and overvoltage
- Supports inverting buck-boost topology
- Plastic packages outgas tested per ASTM E595
- Available in military (–55°C to 125°C) temperature range
- Total ionizing dose (TID) characterized
- Radiation hardness assurance (RHA) availability of up to 100krad(Si)
- Single-Event Effects (SEE) characterized
- Single-event latchup (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune up to linear energy transfer (LET) = 75MeV-cm2/mg
- Single-event functional interrupt (SEFI) and single-event transient (SET) characterized up to LET = 75MeV-cm2/mg
- Input voltage range from 4.5V to 14V
- 12A maximum output current
- High efficiency (typical values for VIN = 12V, VOUT = 3.3V, fSW = 500kHz)
- 91% (CFP), 91% (plastic) at 2A
- 87% (CFP), 88% (plastic) at 9A
- 85% (CFP), 86% (plastic) at 12A
- Integrated HS 45mΩ(CFP)/31mΩ(plastic) and LS 33mΩ(CFP)/27mΩ(plastic) MOSFETs (typ at 12V)
- Flexible switching frequency options:
- 100kHz to 1MHz, accurate (±15% or better), adjustable internal oscillator
- 100kHz to 1MHz external sync capability
- SYNC pins can be configured 90° out of phase to parallel up to 4 devices
- 0.6V ±0.67% (CFP), ±0.83% (plastic) voltage reference over line, temperature, and radiation
- Differential remote sensing
- Selectable current limit
- FAULT input pin for flexible fault management
- Monotonic start-up into prebiased outputs
- Adjustable slope compensation and soft-start
- Adjustable input enable and power-good output for power sequencing
- Power-good output monitor for undervoltage and overvoltage
- Supports inverting buck-boost topology
- Plastic packages outgas tested per ASTM E595
- Available in military (–55°C to 125°C) temperature range