0
TPS7B4255-Q1
  • TPS7B4255-Q1
  • TPS7B4255-Q1
  • TPS7B4255-Q1

TPS7B4255-Q1

ACTIVE

Automotive, 70-mA 40-V voltage-tracking low-dropout (LDO) regulator with 5-mV tracking tolerance

Texas Instruments TPS7B4255-Q1 Product Info

1 April 2026 5

Parameters

Rating

Automotive

Vin (max) (V)

40

Vin (min) (V)

3

Iout (max) (A)

0.07

Output options

Tracking Output

Vout (max) (V)

40

Vout (min) (V)

2

Noise (µVrms)

150

Iq (typ) (mA)

0.031

Features

Reverse Current Protection, Reverse voltage protection, Short-to-battery protection

Thermal resistance θJA (°C/W)

127, 176

TI functional safety category

Functional Safety-Capable

Load capacitance (min) (µF)

1

Regulated outputs (#)

1

Dropout voltage (Vdo) (typ) (mV)

500

Operating temperature range (°C)

-40 to 125

Package

SOT-23 (DBV)-5-8.12 mm² 2.9 x 2.8

Features

  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
    • Junction temperature: –40°C to +150°C, TJ
  • Wide input operating voltage range (3 V to 40 V):
    • Absolute maximum input voltage range: –40 V to +45 V
  • Wide output voltage range: 2 V to 40 V
  • Maximum output current: 70 mA
  • Very-tight, output-tracking tolerance: 5 mV (max)
  • Low dropout voltage: 500 mV (max) at 70 mA
  • Combined reference and enable functionalities
  • Low quiescent current at light load: 35 µA
  • Wide COUT and ESR range:
    • Stable with 1-µF to 200-µF ceramic output capacitor, 1-mΩ to 3-Ω ESR
  • Integrated protection features:
    • Reverse current protection
    • Reverse polarity protection
    • Overtemperature protection
    • Protection against output short-circuit to ground and supply
  • Available in two 5-pin SOT-23 packages:
    • Standard SOT-23 (DBV)
    • Thermally enhanced SOT-23 (DYB)
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
    • Junction temperature: –40°C to +150°C, TJ
  • Wide input operating voltage range (3 V to 40 V):
    • Absolute maximum input voltage range: –40 V to +45 V
  • Wide output voltage range: 2 V to 40 V
  • Maximum output current: 70 mA
  • Very-tight, output-tracking tolerance: 5 mV (max)
  • Low dropout voltage: 500 mV (max) at 70 mA
  • Combined reference and enable functionalities
  • Low quiescent current at light load: 35 µA
  • Wide COUT and ESR range:
    • Stable with 1-µF to 200-µF ceramic output capacitor, 1-mΩ to 3-Ω ESR
  • Integrated protection features:
    • Reverse current protection
    • Reverse polarity protection
    • Overtemperature protection
    • Protection against output short-circuit to ground and supply
  • Available in two 5-pin SOT-23 packages:
    • Standard SOT-23 (DBV)
    • Thermally enhanced SOT-23 (DYB)

Description

The TPS7B4255-Q1 is a low-dropout (LDO) voltage-tracking regulator, with high tracking accuracy and excellent load and line transient response. The device is available in two 5-pin, SOT-23 packages (DBV and DYB). The TPS7B4255-Q1 is designed to supply off-board sensors in automotive applications such as powertrain systems. Because the risk of failure in cables that deliver off-board power is high, the device comes with integrated protection features against fault conditions such as reverse current (short to battery), reverse polarity, output short to ground (current limit), and overtemperature (thermal shutdown). The device is designed to handle a 45-V (absolute maximum) input voltage and survive the automotive load dump transient conditions.

A reference voltage applied at the ADJ/EN pin is effectively tracked at the OUT pin with very tight tolerance for loads up to 70 mA. The TPS7B4255-Q1 can therefore deliver the power-supply voltage to the off-board sensors with high precision, which can help improve the reliability and accuracy of measurements made using ratiometric sensors.

By setting the ADJ/EN input pin low, the TPS7B4255-Q1 switches to standby mode and reduces the quiescent current of the LDO to less than 3.25 µA.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request