0
TAC5211
  • TAC5211
  • TAC5211
  • TAC5211

TAC5211

ACTIVE

High-performance mono audio codec with 119dB dynamic range ADC and 120dB dynamic range DAC

Texas Instruments TAC5211 Product Info

1 April 2026 4

Parameters

Number of ADC channels

1

Number of DAC channels

1

Digital audio interface

I2S, L, TDM

Control interface

I2C, SPI

Analog inputs

1

Analog outputs

1

Features

Bypass Mode, Digital mic support, Headset detect, High Dynamic Range, High-performance, Low latency, Low power, Matrix mixing, Mic bias, Mono headphone amplifier, Phase-locked loop (PLL), PowerTune, Single supply, Thermal Foldback

Sampling rate (max) (kHz)

768

Rating

Catalog

ADC SNR (typ) (dB)

119

DAC SNR (typ) (dB)

120

Operating temperature range (°C)

-40 to 125

Package

VQFN (RGE)-24-16 mm² 4 x 4

Features

  • Mono high-performance audio ADC
    • Performance:
      • Line/Microphone differential input dynamic range: 119dB
      • THD+N: –98dB
    • Input voltage:
      • Differential, 2VRMS full-scale input
      • Single-ended, 1VRMS full-scale input
    • Input mix/mux options
    • ADC sample rate (fS) = 4kHz to 768kHz
    • Programmable microphone bias (up to 3V)
    • Up to 4 Record Channels
      • 1 Channel Analog + 3 Channel Digital
      • 4 Channel Digital
  • Mono differential or Stereo single-ended high performance audio DAC
    • Performance:
      • DAC to differential line-out dynamic range: 120dB
      • DAC to differential headphone-out dynamic range: 118dB
      • THD+N:–104dB
    • Line-out/headphone output voltage :
      • Differential, 2VRMS full-scale
      • Pseudo-differential, 1VRMS full-scale
      • Single-ended, 1VRMS full-scale
    • DAC sample rate (fS) = 4kHz to 768kHz
  • Common features
    • Analog input to output bypass
    • Voice activity detection
    • Ultrasonic activity detection
    • Battery and thermal foldback protection
    • Signal distortion limiter
    • Low and Ultra-low latency filter options
    • Programmable HPF and Biquad filters
    • I2C or SPI control interface
    • Audio serial interface
      • Format: TDM, I2S or Left-justified (LJ)
      • Word length: 16, 20, 24 or 32 bits
      • Bus controller and target modes
    • Programmable PLL for flexible clocking
    • Auto clock and sample rate detection
    • Low power modes
      • 5mW for 1-Ch recording (1.8V Supply)
      • 7mW for 1-Ch playback (1.8V Supply)
    • Single supply operation AVDD: 1.8V or 3.3V
    • I/O supply operation: 1.2V or 1.8V or 3.3V
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C
  • Mono high-performance audio ADC
    • Performance:
      • Line/Microphone differential input dynamic range: 119dB
      • THD+N: –98dB
    • Input voltage:
      • Differential, 2VRMS full-scale input
      • Single-ended, 1VRMS full-scale input
    • Input mix/mux options
    • ADC sample rate (fS) = 4kHz to 768kHz
    • Programmable microphone bias (up to 3V)
    • Up to 4 Record Channels
      • 1 Channel Analog + 3 Channel Digital
      • 4 Channel Digital
  • Mono differential or Stereo single-ended high performance audio DAC
    • Performance:
      • DAC to differential line-out dynamic range: 120dB
      • DAC to differential headphone-out dynamic range: 118dB
      • THD+N:–104dB
    • Line-out/headphone output voltage :
      • Differential, 2VRMS full-scale
      • Pseudo-differential, 1VRMS full-scale
      • Single-ended, 1VRMS full-scale
    • DAC sample rate (fS) = 4kHz to 768kHz
  • Common features
    • Analog input to output bypass
    • Voice activity detection
    • Ultrasonic activity detection
    • Battery and thermal foldback protection
    • Signal distortion limiter
    • Low and Ultra-low latency filter options
    • Programmable HPF and Biquad filters
    • I2C or SPI control interface
    • Audio serial interface
      • Format: TDM, I2S or Left-justified (LJ)
      • Word length: 16, 20, 24 or 32 bits
      • Bus controller and target modes
    • Programmable PLL for flexible clocking
    • Auto clock and sample rate detection
    • Low power modes
      • 5mW for 1-Ch recording (1.8V Supply)
      • 7mW for 1-Ch playback (1.8V Supply)
    • Single supply operation AVDD: 1.8V or 3.3V
    • I/O supply operation: 1.2V or 1.8V or 3.3V
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C

Description

The TAC5211 is a high-performance mono audio codec with 2VRMS differential input, 119dB mono ADC and 2VRMS differential output, 120dB mono or 1VRMS single-ended output, 111dB stereo DAC. The TAC5211 supports both differential and single-ended inputs and outputs. The ADC supports both line/microphone input signals with options for AC or DC coupling configurations. The DAC outputs can be configured for either line-output or headphone loads. The DAC can drive up to 62.5mW into a 16Ω headphone load. The TAC5211 integrates programable channel gain, digital volume control, a low-jitter phase-locked loop (PLL), a programmable high-pass filter (HPF), programmable EQ and biquad filters, low-latency and ultra-low latency filter modes, and allows for sample rates up to 768kHz for both ADC and DAC signal chains. The TAC5211 supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with I2C or SPI. These integrated high-performance features, along with a single supply operation, makes TAC5211 an excellent choice for space-constrained audio applications.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request