0
TAA5412-Q1
  • TAA5412-Q1
  • TAA5412-Q1
  • TAA5412-Q1

TAA5412-Q1

ACTIVE

Automotive stereo audio ADC with 112dB dynamic range, high-voltage input, mic bias and diagnostics

Texas Instruments TAA5412-Q1 Product Info

1 April 2026 4

Parameters

Number of ADC channels

2

Sampling rate (max) (kHz)

768

Analog inputs

2

Control interface

I2C, SPI

Digital audio interface

I2S, LJ, TDM

THD+N (dB)

-99

ADC SNR (typ) (dB)

112

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Package

WQFN (RTV)-32-25 mm² 5 x 5

Features

  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C
  • ADC performance:
    • Line/Microphone differential input dynamic range: 112dB
    • Differential input THD+N: –99dB
    • Channel summing mode supports high SNR: 114dB
  • ADC input voltage:
    • Differential, 10VRMS full-scale inputs
    • Single-ended, 5VRMS full-scale inputs
  • ADC sample rate (fS) = 4kHz to 768kHz
  • Programmable microphone bias (3V to 10V):
    • With an integrated efficient boost converter, or
    • With external high voltage HVDD supply
  • Programmable microphone input fault diagnostics:
    • Open inputs or shorted inputs
    • Short to ground, MICBIAS, or VBAT
    • MICBIAS over current protection
  • Up to 4 Record Channels
    • 2 Channel Analog + 2 Channel Digital
    • 1 Channel Analog + 3 Channel Digital
    • 4 Channel Digital
  • Low-latency and Ultra low-latency decimation filter options
  • Programmable HPF and biquad digital filters
  • Automatic gain controller (AGC)
  • Programmable channel settings:
    • Digital volume control: –80dB to 47dB
    • Gain calibration with 0.1dB resolution
    • Phase calibration with 325.5ns resolution
  • Gain and phase calibration for ADC channels
  • I2C or SPI controls
  • Audio serial data interface:
    • Format: TDM, I2S, or left-justified (LJ)
    • Word length: 16, 20, 24, or 32 Bits
    • Bus controller and target modes
  • Programmable PLL for flexible clocking
  • Low Power Modes
    • < 18.5mW for 2-ch recording
  • Single-supply operation AVDD: 3.3V
  • I/O supply operation: 3.3V, 1.8V or 1.2V
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C
  • ADC performance:
    • Line/Microphone differential input dynamic range: 112dB
    • Differential input THD+N: –99dB
    • Channel summing mode supports high SNR: 114dB
  • ADC input voltage:
    • Differential, 10VRMS full-scale inputs
    • Single-ended, 5VRMS full-scale inputs
  • ADC sample rate (fS) = 4kHz to 768kHz
  • Programmable microphone bias (3V to 10V):
    • With an integrated efficient boost converter, or
    • With external high voltage HVDD supply
  • Programmable microphone input fault diagnostics:
    • Open inputs or shorted inputs
    • Short to ground, MICBIAS, or VBAT
    • MICBIAS over current protection
  • Up to 4 Record Channels
    • 2 Channel Analog + 2 Channel Digital
    • 1 Channel Analog + 3 Channel Digital
    • 4 Channel Digital
  • Low-latency and Ultra low-latency decimation filter options
  • Programmable HPF and biquad digital filters
  • Automatic gain controller (AGC)
  • Programmable channel settings:
    • Digital volume control: –80dB to 47dB
    • Gain calibration with 0.1dB resolution
    • Phase calibration with 325.5ns resolution
  • Gain and phase calibration for ADC channels
  • I2C or SPI controls
  • Audio serial data interface:
    • Format: TDM, I2S, or left-justified (LJ)
    • Word length: 16, 20, 24, or 32 Bits
    • Bus controller and target modes
  • Programmable PLL for flexible clocking
  • Low Power Modes
    • < 18.5mW for 2-ch recording
  • Single-supply operation AVDD: 3.3V
  • I/O supply operation: 3.3V, 1.8V or 1.2V

Description

The TAA5412-Q1 is a 2-channel high-performance, audio analog-to-digital converter (ADC) that supports analog input signals up to 10VRMS with 112dB dynamic range. The TAA5412-Q1 supports line and microphone inputs, and allows for both single-ended and differential input configurations with options for AC and DC coupling. This device offers an integrated high-voltage, programmable microphone bias, and input diagnostic circuitry that allows direct connection to microphone-based automotive systems with full fault diagnostic capability for direct-coupled inputs. The TAA5412-Q1 integrates an efficient boost converter to generate a high voltage microphone bias using an external, low-voltage, 3.3V supply. The device can also directly use an external high-voltage supply (HVDD), which is any readily available supply in the system to generate this microphone bias. The TAA5412-Q1 integrates the programable channel gain, digital volume control, a low-jitter phase-locked loop (PLL), a programmable high-pass filter (HPF), biquad filters, decimation filters with low and ultra-low latency filter modes, and allows for sample rates up to 768kHz. The TAA5412-Q1 supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with either the I2C or SPI interface. These integrated high-performance features, along with a single, 3.3V supply operation, make the TAA5412-Q1 device an excellent choice for scalable, space-constrained automotive systems.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request