0
TAD5112
  • TAD5112
  • TAD5112
  • TAD5112

TAD5112

ACTIVE

Low-power stereo audio DAC with 110dB dynamic range, and headphone and line driver

Texas Instruments TAD5112 Product Info

1 April 2026 6

Parameters

Number of DAC channels

2

Sampling rate (min) (kHz)

8

Sampling rate (max) (kHz)

768

THD+N (dB)

-101

Control interface

I2C, SPI

Resolution (Bits)

32

DAC SNR (typ) (dB)

110

Analog outputs

2

Architecture

Delta-Sigma

Operating temperature range (°C)

-40 to 125

Rating

Catalog

Package

VQFN (RGE)-24-16 mm² 4 x 4

Features

  • Stereo differential or Quad single-ended low-power audio DAC
    • Performance:
      • DAC to differential line-out dynamic range: 110dB
      • DAC to differential headphone-out dynamic range: 109dB
      • THD+N: –101dB
    • Line-out/headphone output voltage:
      • Differential, 2VRMS full-scale
      • Psuedo-differential, 1VRMS full-scale
      • Single-ended, 1VRMS full-scale
    • DAC sample rates (fs) = 4kHz to 768kHz
  • Key features
    • Analog input to output bypass path
    • 4-Channel PDM digital microphone record path
    • Input and output mix/mux options
    • Voice activity detection
    • Ultrasonic activity detection
    • Ultrasonic signal or tone generator
    • Battery and thermal foldback protection
    • Signal distortion limiter
    • Low and Ultra-low latency filter options
    • Programmable HPF and Biquad filters
    • I2C & SPI Control Interface
    • Audio Serial Interface
      • Format: TDM, I2S or Left-justified (LJ)
      • Word length: 16, 20, 24 or 32 Bits
      • Bus controller and target modes
      • Daisy chain in TDM Mode
    • Programmable PLL for flexible clocking
    • Auto clock and sample rate detection
    • Low Power Modes
      • 10.5mW for 2-Ch Playback (1.8V supply)
    • Single Supply Operation AVDD: 1.8V or 3.3V
    • I/O Supply Operation: 1.2V or 1.8V or 3.3V
    • Temperature grade 1: -40°C ≤ TA ≤ +125°C
  • Stereo differential or Quad single-ended low-power audio DAC
    • Performance:
      • DAC to differential line-out dynamic range: 110dB
      • DAC to differential headphone-out dynamic range: 109dB
      • THD+N: –101dB
    • Line-out/headphone output voltage:
      • Differential, 2VRMS full-scale
      • Psuedo-differential, 1VRMS full-scale
      • Single-ended, 1VRMS full-scale
    • DAC sample rates (fs) = 4kHz to 768kHz
  • Key features
    • Analog input to output bypass path
    • 4-Channel PDM digital microphone record path
    • Input and output mix/mux options
    • Voice activity detection
    • Ultrasonic activity detection
    • Ultrasonic signal or tone generator
    • Battery and thermal foldback protection
    • Signal distortion limiter
    • Low and Ultra-low latency filter options
    • Programmable HPF and Biquad filters
    • I2C & SPI Control Interface
    • Audio Serial Interface
      • Format: TDM, I2S or Left-justified (LJ)
      • Word length: 16, 20, 24 or 32 Bits
      • Bus controller and target modes
      • Daisy chain in TDM Mode
    • Programmable PLL for flexible clocking
    • Auto clock and sample rate detection
    • Low Power Modes
      • 10.5mW for 2-Ch Playback (1.8V supply)
    • Single Supply Operation AVDD: 1.8V or 3.3V
    • I/O Supply Operation: 1.2V or 1.8V or 3.3V
    • Temperature grade 1: -40°C ≤ TA ≤ +125°C

Description

The TAD5112 is a low-power audio DAC with 2VRMS differential output, 110dB dynamic range stereo channels or 1VRMS single-ended output, 107dB dynamic range quad channels. The TAD5112 supports both differential and single-ended inputs and outputs. The DAC outputs can be configured for either line-output or headphone loads. The DAC can drive up to 62.5mW into a 16Ω headphone load. The TAD5112 integrates programable channel gain, digital volume control, a low-jitter phase-locked loop (PLL), a programmable high-pass filter (HPF), programmable EQ and biquad filters, low-latency and ultra-low latency filter modes, and allows for sample rates up to 768kHz for both the DAC and PDM microphone signal-chains. The TAD5112 supports analog input to output bypass option and also recording up to four-channel digital microphones with the PDM interface. Data from Analog-In and Digital-In can be mixed inside the device as well. The TAD5112 supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with I2C or SPI. These integrated high-performance features, along with a single supply operation, make TAD5112 an excellent choice for space-constrained audio applications.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request