0
TPS544C26
  • TPS544C26
  • TPS544C26

TPS544C26

ACTIVE

4-V to 16-V, 35-A SVID and I²C synchronous step-down converter

Texas Instruments TPS544C26 Product Info

1 April 2026 5

Parameters

Rating

Catalog

Topology

Buck

Iout (max) (A)

35

Vin (max) (V)

16

Vin (min) (V)

4

Vout (max) (V)

3.04

Vout (min) (V)

0.5

Features

Adaptive/Dynamic Voltage Scaling, Adjustable current limit, Differential Remote Sense, Enable, Forced PWM, I2C, Light-load efficiency, Overcurrent protection, Power good, Prebias startup, SVID, Soft Start Adjustable, Synchronous rectification, Telemetry, UVLO adjustable, VID Interface

Control mode

D-CAP+

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.005

Duty cycle (max) (%)

76

Package

WQFN-FCRLF (RXX)-37-30 mm² 6 x 5

Features

  • Single chip power supply for SVID rails
  • Intel VR13 SVID compliant
  • I2C interface with NVM for configuration, telemetry (V/I/T) and fault reporting

  • Input power monitoring for DDR5 memory RAPL
  • Integrated 4.0-mΩ and 1.0-mΩ MOSFETs for 35-A continuous current operation
  • Supports external 5-V bias improving efficiency and enabling 2.7-V minimum input voltage
  • VOUT programmable from 0.25 V to 3.04 V
  • Precision voltage reference and differential remote sense for high output accuracy
    • ±0.5% VOUT tolerance from 0°C to 85°C TJ
    • ±1% VOUT tolerance from –40°C to 125°C TJ
  • D-CAP+™ control topology with fast transient response, supporting all ceramic output capacitors
  • Programmable internal loop compensation including droop
  • Selectable cycle-by-cycle valley current limit
  • Selectable operation frequency 0.6 MHz to 1.2 MHz with DCM or FCCM operation
  • Safe start-up into pre-biased outputs
  • Programmable soft-start time from 1 ms to 16 ms
  • Programmable soft-stop time from 0.5 ms to 4 ms
  • Open-drain power-good output (VRRDY) and Catastrophic fault indicator (CAT_FAULT#)
  • Programmable overcurrent, overvoltage, undervoltage, overtemperature protections
  • 5 mm × 6 mm, 37-pin WQFN-FCRLF package
  • TPS548C26 non-SVID/I2C analog converter in the same package available soon
  • Single chip power supply for SVID rails
  • Intel VR13 SVID compliant
  • I2C interface with NVM for configuration, telemetry (V/I/T) and fault reporting

  • Input power monitoring for DDR5 memory RAPL
  • Integrated 4.0-mΩ and 1.0-mΩ MOSFETs for 35-A continuous current operation
  • Supports external 5-V bias improving efficiency and enabling 2.7-V minimum input voltage
  • VOUT programmable from 0.25 V to 3.04 V
  • Precision voltage reference and differential remote sense for high output accuracy
    • ±0.5% VOUT tolerance from 0°C to 85°C TJ
    • ±1% VOUT tolerance from –40°C to 125°C TJ
  • D-CAP+™ control topology with fast transient response, supporting all ceramic output capacitors
  • Programmable internal loop compensation including droop
  • Selectable cycle-by-cycle valley current limit
  • Selectable operation frequency 0.6 MHz to 1.2 MHz with DCM or FCCM operation
  • Safe start-up into pre-biased outputs
  • Programmable soft-start time from 1 ms to 16 ms
  • Programmable soft-stop time from 0.5 ms to 4 ms
  • Open-drain power-good output (VRRDY) and Catastrophic fault indicator (CAT_FAULT#)
  • Programmable overcurrent, overvoltage, undervoltage, overtemperature protections
  • 5 mm × 6 mm, 37-pin WQFN-FCRLF package
  • TPS548C26 non-SVID/I2C analog converter in the same package available soon

Description

The TPS544C26 device is a highly integrated buck converter with D-CAP+ control topology for the fast transient response. All programmable parameters can be configured by the I2C interface and stored in NVM as the new default values to minimize the external component count. These features make the device well-suited for space-constrained applications.

The TPS544C26 device is designed to work with Intel CPUs and fits well for single-phase, low-to-mid current SVID rails in Intel’s server and SoC platforms.

Fault management and status reports for the Overcurrent limit, VOUT OVF/UVF, and OTF are provided on the device. The TPS544C26 device provides a full set of telemetry, including VOUT, IOUT, and IC temperature. Additionally, input power monitoring through an external sensing resistor is provided for board-level power management.

The TPS544C26 device is a lead-free device and is RoHS compliant without exemption.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request