0
TPS25984B
  • TPS25984B
  • TPS25984B
  • TPS25984B

TPS25984B

ACTIVE

4.5V to 16V, 0.8mΩ, 70A stackable eFuse with accurate and fast current monitor

Texas Instruments TPS25984B Product Info

1 April 2026 6

Parameters

Vabsmax_cont (V)

20

Vin (max) (V)

16

Vin (min) (V)

4.5

Current limit (max) (A)

55

Current limit (min) (A)

10

Features

Adjustable current limit, Adjustable soft start, Current monitoring, Fault output, Overcurrent protection, Overvoltage protection, Power good signal, Short-circuit protection, Stackable, Thermal shutdown, adjustable UVLO

Overcurrent response

Circuit breaker

Fault response

Auto-retry, Latch-off

Ron (typ) (mΩ)

0.8

Overvoltage response

Cut-off

Rating

Catalog

Soft start

Adjustable

Quiescent current (Iq) (typ) (A)

0.0035

Quiescent current (Iq) (max) (A)

0.0044

Device type

eFuses and hot swap controllers

Operating temperature range (°C)

-40 to 125

Package

WQFN-FCRLF (RZJ)-32-25 mm² 5 x 5

Features

  • Input operating voltage range: 4.5V to 16V
    • Absolute maximum: 20V DC, 23.5V transient
    • Withstands negative voltages up to –1V output
  • Integrated FET, ultra-low RDSON: 0.8mΩ (typ)
  • Rated RMS current: 55A; peak current: 70A
  • Supports parallel connection of multiple eFuses for higher current support
    • Current balancing during start-up
  • Robust overcurrent protection
    • Adjustable overcurrent threshold (IOCP): 10A to 80A with accuracy of ±5%
    • Circuit-breaker response during steady-state operation with internal transient overcurrent blanking timer to support peak currents
    • Adjustable active current limit in start-up (ILIM)
  • Robust short-circuit protection
    • Fast-trip response (<200ns) to output short-circuit events
    • Adjustable (2 × IOCP) and fixed thresholds
    • Immune to supply line transients — no nuisance tripping
  • Precise analog load current monitoring
    • Accuracy: ±1.4%; bandwidth: >500kHz
  • Fast overvoltage protection (fixed 18.4V threshold)
  • Adjustable output slew rate control (dVdt) for inrush current protection
  • Active high enable input with adjustable undervoltage lockout (UVLO)
  • Overtemperature protection (OTP)
    • FET SOA: 10W√s
  • Integrated FET health monitoring and reporting
  • Analog die temperature monitor output (TEMP)
  • Dedicated fault indication pin (GOK/FLT)
  • Power-Good indication pin (PG)
  • Small footprint: QFN-32, 5mm × 5mm
  • 100% Pb free
  • Input operating voltage range: 4.5V to 16V
    • Absolute maximum: 20V DC, 23.5V transient
    • Withstands negative voltages up to –1V output
  • Integrated FET, ultra-low RDSON: 0.8mΩ (typ)
  • Rated RMS current: 55A; peak current: 70A
  • Supports parallel connection of multiple eFuses for higher current support
    • Current balancing during start-up
  • Robust overcurrent protection
    • Adjustable overcurrent threshold (IOCP): 10A to 80A with accuracy of ±5%
    • Circuit-breaker response during steady-state operation with internal transient overcurrent blanking timer to support peak currents
    • Adjustable active current limit in start-up (ILIM)
  • Robust short-circuit protection
    • Fast-trip response (<200ns) to output short-circuit events
    • Adjustable (2 × IOCP) and fixed thresholds
    • Immune to supply line transients — no nuisance tripping
  • Precise analog load current monitoring
    • Accuracy: ±1.4%; bandwidth: >500kHz
  • Fast overvoltage protection (fixed 18.4V threshold)
  • Adjustable output slew rate control (dVdt) for inrush current protection
  • Active high enable input with adjustable undervoltage lockout (UVLO)
  • Overtemperature protection (OTP)
    • FET SOA: 10W√s
  • Integrated FET health monitoring and reporting
  • Analog die temperature monitor output (TEMP)
  • Dedicated fault indication pin (GOK/FLT)
  • Power-Good indication pin (PG)
  • Small footprint: QFN-32, 5mm × 5mm
  • 100% Pb free

Description

The TPS25984Bx is a high-current, stackable integrated hotswap protection (eFuse) device in a small package. The device provides multiple protection modes using very few external components and is a robust defense against overloads, short circuits, and excessive inrush current.

Applications with particular inrush current requirements can set the output slew rate with a single external capacitor. Output current limit level can be set by user as per system needs. Internal overcurrent blanking timer allows systems to support transient peaks in the load current without tripping the eFuse.

Multiple TPS25984Bx devices can be stacked in parallel to increase the total current capacity for high power systems. All devices share current during start-up to avoid over-stressing some of the devices which can result in premature or partial shutdown of the parallel chain.

An integrated fast and accurate sense analog load current monitor facilitates predictive maintenance and advanced dynamic platform power management techniques such as Intel PSYS and PROCHOT™ to maximize system throughput and power supply utilization.

The devices are characterized for operation over a junction temperature range of –40°C to +125°C.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request