0
TPS22996H-Q1
  • TPS22996H-Q1
  • TPS22996H-Q1

TPS22996H-Q1

ACTIVE

Automotive, two-channel, 5.5V 4A 14mΩ load switch with adjustable rise time

Texas Instruments TPS22996H-Q1 Product Info

1 April 2026 3

Parameters

Imax (A)

4

Vin (max) (V)

5.5

Vin (min) (V)

0.6

Number of channels

2

Features

Inrush current control, Quick output discharge, Thermal shutdown

Quiescent current (Iq) (typ) (µA)

18

Soft start

Adjustable Rise Time

Rating

Automotive

Ron (typ) (mΩ)

13

Shutdown current (ISD) (typ) (µA)

0.005

Current limit type

None

Function

Inrush current control, Thermal shutdown

FET

Internal

Operating temperature range (°C)

-40 to 125

Device type

Load switches

Package

SOT-5X3 (DYC)-8-2.52 mm² 2.1 x 1.2

Features

  • Integrated dual-channel load switch
  • Input voltage range: 0.6V to VBIAS
  • VBIAS voltage range: 2.5V to 5.5V
  • ON-Resistance
    • RON = 13mΩ (typical) at VIN = 0.6V to 5V, VBIAS = 5V
  • 4A maximum continuous switch current per channel
  • Quiescent current:
    • 18µA (typical, both channels) at VIN = VBIAS = 5V
    • 13µA (typical, single channel) at VIN = VBIAS = 5V
  • Humidity resistant:
    • Device keeps functionality (ON, OFF, protection), but timing specification is affected under the following conditions:
      • 100kΩ short to GND
      • 100kΩ short to power
  • Control input threshold enables use of 1.2V, 1.8V, 2.5V, and 3.3V logic
  • Configurable rise time
  • Thermal shutdown
  • Quick output discharge (QOD)
  • Integrated dual-channel load switch
  • Input voltage range: 0.6V to VBIAS
  • VBIAS voltage range: 2.5V to 5.5V
  • ON-Resistance
    • RON = 13mΩ (typical) at VIN = 0.6V to 5V, VBIAS = 5V
  • 4A maximum continuous switch current per channel
  • Quiescent current:
    • 18µA (typical, both channels) at VIN = VBIAS = 5V
    • 13µA (typical, single channel) at VIN = VBIAS = 5V
  • Humidity resistant:
    • Device keeps functionality (ON, OFF, protection), but timing specification is affected under the following conditions:
      • 100kΩ short to GND
      • 100kΩ short to power
  • Control input threshold enables use of 1.2V, 1.8V, 2.5V, and 3.3V logic
  • Configurable rise time
  • Thermal shutdown
  • Quick output discharge (QOD)

Description

TPS22996H-Q1 is a dual-channel load switch with controlled turnon. The device contains two N-channel MOSFETs that can operate over an input voltage range of 0.6V to 5.5V, and can support a maximum continuous current of 4A per channel. Each switch is independently controlled by an on and off input (ON1 and ON2), which can interface directly with low-voltage control signals. The device is capable of thermal shutdown when the junction temperature is above the threshold, turning the switch off. The switch turns on again when the junction temperature stabilizes to a safe range. The device also offers an integrated 230Ω on-chip load resistor for quick output discharge when the switch is turned off.

The pins of the TPS22996H-Q1 are resistant to high humidity conditions, meaning that the device is able to function with a 100kΩ short from any pin to GND or power.

The TPS22996H-Q1 is available in a small, space-saving 2.1mm × 1.2mm 8-DYC package. The device is characterized for operation over the free-air temperature range of –40°C to 125°C.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request