0
ACTIVE
Rating |
Automotive |
Number of supplies monitored |
1 |
Threshold voltage 1 (typ) (V) |
1.2, 2.2, 2.9, 3, 3.1, 3.2, 3.6, 4 |
Features |
Manual reset capable, Reset time delay, Undervoltage monitor only |
Reset threshold accuracy (%) |
1 |
Iq (typ) (mA) |
0.00012 |
Output driver type/reset output |
Active-high, Active-low, Open-drain, Push-Pull |
Time delay (ms) |
0.04, 40 |
Watchdog timer WDI (s) |
None |
Supply voltage (min) (V) |
0.7 |
Supply voltage (max) (V) |
6 |
TI functional safety category |
Functional Safety-Capable |
Operating temperature range (°C) |
-40 to 125 |
SOT-23 (DBV)-5-8.12 mm² 2.9 x 2.8
Qualified for automotive applications:
Designed for high performance:
Designed for a wide range of applications:
Multiple output topologies / Package type:
The TLV840-Q1 device is a voltage supervisor or reset IC that can operate at wide input voltage levels from 0.7 V to 6 V while maintaining very low quiescent current across the whole VDD and temperature range. TLV840-Q1 offers the best combination of low power consumption, high accuracy and low propagation delay (tp_HL= 30 µs typical).
Reset output signal is asserted when the voltage at VDD drops below the negative voltage threshold (VIT-). Reset signal is cleared when VDD rise above VIT- plus hysteresis (VHYS) and the reset time delay (tD) expires. Reset time delay can be programmed by connecting a capacitor between the CT pin and ground. For a minimum reset delay time the CT pin can be left floating. The TLV840-Q1, with its manual reset pin (MR), offers program flexibility by forcing the system into a hard reset when the pin is asserted.
Additional features: Low power-on reset voltage (VPOR), built-in glitch immunity protection for VDD, built-in hysteresis, low open-drain output leakage current (Ilkg(OD)). TLV840-Q1 is a perfect voltage monitoring solution for automotive applications and battery-powered / low-power applications.
WELL LINK CHIPS GROUP CO.,LIMITED FLAT/RM 1802 BEVERLY HOUSE 93-107 LOCKHART ROAD WANCHAI HK
