Texas Instruments TLV61290 Product Info

Parameters

Rating	Catalog
Topology	Boost
Vin (max) (V)	5.5
Vin (min) (V)	2
Vout (max) (V)	5.5
Vout (min) (V)	2.35
Switch current limit (typ) (A)	11
Features	Adjustable current limit, Automatic PWM/PFM transition, Bypass Mode Pass-through Mode, Enable, I2C, Load Disconnect, Output discharge, Spread Spectrum, Synchronous rectification
EMI features	Spread Spectrum
Operating temperature range (°C)	to
Iq (typ) (A)	0.00003
Duty cycle (max) (%)	90

Package

DSBGA (YBG)-16-2.486929 mm² 1.577 x 1.577

Features

Wide VIN range from 2.0V to 5.0V
- Start up input voltage: 2.2V
Programmable average input current limit (3.5A to 8A) via I2C
Programmable output voltage (2.35V to 5.0V) via I2C, default 3.4V
97.99% efficiency at VIN = 3.3V, VOUT = 3.4V, IOUT = 1A
95.73% efficiency at VIN = 3.3V, VOUT = 3.4V, IOUT = 3A
<300mV undershoot at VIN = 2.7V, VOUT = 3.4V, IOUT = 0A → 3A (0.2A/µs slew rate)
Integrated bypass MOSFET (10mΩ), high-side MOSFET (10mΩ), low-side MOSFET (10mΩ)
Auto bypass mode when VIN > VOUT
Programmable auto PFM operation, Forced PWM operation or Ultrasonic mode operation (avoid audio band noise) during light load condition
Spread spectrum modulation and EMI improvement
Output discharge function when EN logic is low
True disconnection between input and output during shutdown
Thermal shutdown and over current protection
I2C compatible I/F up to 1Mbps
1.2V I/O logic control interface
16-ball WCSP package

Wide VIN range from 2.0V to 5.0V
- Start up input voltage: 2.2V
Programmable average input current limit (3.5A to 8A) via I2C
Programmable output voltage (2.35V to 5.0V) via I2C, default 3.4V
97.99% efficiency at VIN = 3.3V, VOUT = 3.4V, IOUT = 1A
95.73% efficiency at VIN = 3.3V, VOUT = 3.4V, IOUT = 3A
<300mV undershoot at VIN = 2.7V, VOUT = 3.4V, IOUT = 0A → 3A (0.2A/µs slew rate)
Integrated bypass MOSFET (10mΩ), high-side MOSFET (10mΩ), low-side MOSFET (10mΩ)
Auto bypass mode when VIN > VOUT
Programmable auto PFM operation, Forced PWM operation or Ultrasonic mode operation (avoid audio band noise) during light load condition
Spread spectrum modulation and EMI improvement
Output discharge function when EN logic is low
True disconnection between input and output during shutdown
Thermal shutdown and over current protection
I2C compatible I/F up to 1Mbps
1.2V I/O logic control interface
16-ball WCSP package

Description

The TLV61290 provides a power supply solution for products powered by a nickel-rich, silicon anode, Li-ion or LiFePO4 battery. The voltage range is optimized for single-cell portable applications like in smart-phones or POS terminal.

Used as a high-power pre-regulator, the device extends the battery run-time and overcomes input current and voltage limitations of the powered system. With a wide input voltage range of 2.0V to 5.0V. Program the output voltage by I2C up to 5.0V, and the default output voltage is 3.4V.

During operation, when the battery is in a good state of charge, the TLV61290 will work in bypass mode, connecting the battery to the power supply system through the bypass FET. If the battery gets to a lower state of charge and its voltage becomes lower than the desired minimum system voltage, the device seamlessly transits into boost mode to use the full battery capacity.

The TLV61290 offers a very small solution size with 16-ball YBG package.

The TLV61290 provides a power supply solution for products powered by a nickel-rich, silicon anode, Li-ion or LiFePO4 battery. The voltage range is optimized for single-cell portable applications like in smart-phones or POS terminal.

Used as a high-power pre-regulator, the device extends the battery run-time and overcomes input current and voltage limitations of the powered system. With a wide input voltage range of 2.0V to 5.0V. Program the output voltage by I2C up to 5.0V, and the default output voltage is 3.4V.

During operation, when the battery is in a good state of charge, the TLV61290 will work in bypass mode, connecting the battery to the power supply system through the bypass FET. If the battery gets to a lower state of charge and its voltage becomes lower than the desired minimum system voltage, the device seamlessly transits into boost mode to use the full battery capacity.

The TLV61290 offers a very small solution size with 16-ball YBG package.

ELECTRONIC COMPONENTS
All In One Distributor

TLV61290

Wide-voltage battery front-end DC/DC converter for single-cell Li-Ion, Ni-Rich, Si-Anode application

Texas Instruments TLV61290 Product Info

Parameters

Package

Features

Description

SUBMITTED SUCCESSFULLY！

ELECTRONIC COMPONENTS All In One Distributor

TLV61290

Wide-voltage battery front-end DC/DC converter for single-cell Li-Ion, Ni-Rich, Si-Anode application

Texas Instruments TLV61290 Product Info

Parameters

Package

Features

Description

SUBMITTED SUCCESSFULLY！

ELECTRONIC COMPONENTS
All In One Distributor