0
TAS2564
  • TAS2564
  • TAS2564
  • TAS2564

TAS2564

ACTIVE

7-W, digital input smart amp with I/V sense for speaker protection & integrated 13-V Class-H boost

Texas Instruments TAS2564 Product Info

1 April 2026 7

Parameters

Audio input type

Digital Input

Architecture

Class-D Boosted, Smart Amp

Speaker channels (max)

Mono

Iq per channel (typ) (mA)

8.9

Control interface

I2C

Output power (W)

7

Power stage supply (max) (V)

16

Power stage supply (min) (V)

2.7

THD + N at 1 kHz (%)

0.01

Load (min) (Ω)

6.4

Analog supply voltage (min) (V)

2.7

Analog supply voltage (max) (V)

5.5

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Package

DSBGA (YBG)-36-5.76 mm² 2.4 x 2.4

Features

  • Key Features
    • 256 Level, 13-V Class-H Boost
    • Speaker Current and Voltage Sense
    • Inter Chip Alignment (ICLA) of gain across devices.
  • Output Power
    • 7-W 0.1% THD+N (8 Ω at 3.8 V)
  • Power Consumption (1% THD+N, 4.2 V into 8 Ω)
    • 83.5% efficiency at 1 W
    • <1uA HW shutdown VBAT Current
  • Power Supplies
    • VBAT: 2.7 V to 5.5 V
    • VDD: 1.65 V to 1.95 V
    • Digital (1.5 V) is internally generated from VDD.
    • IO and Analog supplies are internally shorted to VDD.
  • Protections
    • Battery: Advanced Brown Out
    • Clipping: VBAT Tracking Peak Voltage Limiter
    • Transducer: DC Detection and Prevention
    • Device: Thermal and Over Current Protection
  • Interfaces and Control
    • I2S/TDM: 8 Channels of 32 bit each up to 96 KSPS
    • I2C: 4 selectable addresses
    • 16 KSPS to 192 KSPS Sample Rates
    • MCLK Free operation
  • Performance
    • Speaker/Receiver Mode with Dynamic Noise Control of Idle Channel Noise (ICN)
    • Receiver Mode: 10 µVrms ICN
    • Speaker Mode: 15 µVrms ICN
    • Spread Spectrum Low EMI Mode
    • 110 dB SNR at 1% THD+N(8Ω)
  • Key Features
    • 256 Level, 13-V Class-H Boost
    • Speaker Current and Voltage Sense
    • Inter Chip Alignment (ICLA) of gain across devices.
  • Output Power
    • 7-W 0.1% THD+N (8 Ω at 3.8 V)
  • Power Consumption (1% THD+N, 4.2 V into 8 Ω)
    • 83.5% efficiency at 1 W
    • <1uA HW shutdown VBAT Current
  • Power Supplies
    • VBAT: 2.7 V to 5.5 V
    • VDD: 1.65 V to 1.95 V
    • Digital (1.5 V) is internally generated from VDD.
    • IO and Analog supplies are internally shorted to VDD.
  • Protections
    • Battery: Advanced Brown Out
    • Clipping: VBAT Tracking Peak Voltage Limiter
    • Transducer: DC Detection and Prevention
    • Device: Thermal and Over Current Protection
  • Interfaces and Control
    • I2S/TDM: 8 Channels of 32 bit each up to 96 KSPS
    • I2C: 4 selectable addresses
    • 16 KSPS to 192 KSPS Sample Rates
    • MCLK Free operation
  • Performance
    • Speaker/Receiver Mode with Dynamic Noise Control of Idle Channel Noise (ICN)
    • Receiver Mode: 10 µVrms ICN
    • Speaker Mode: 15 µVrms ICN
    • Spread Spectrum Low EMI Mode
    • 110 dB SNR at 1% THD+N(8Ω)

Description

The TAS2564 is a digital input, Class-D audio amplifier with a 256 level, 13 V Class-H boost. The robust 13 V Class-H boost provides the power needed for peak output while the algorithmically-controlled 256 level boost reduces the average power consumption. The boost is easily configured with PurePath Console GUI.

The Class-D amplifier is capable of delivering 7 W of peak power into an 8 Ω. TAS2564 is 83.5% efficient at 1 W output level. Integrated speaker voltage and current sense provides real time monitoring to keep speakers in the safe operation area.

Battery tracking peak voltage limiter with brown-out prevention optimizes amplifier headroom over the entire battery discharge. Up to four devices can share a common bus via I2S/TDM + I 2C interfaces.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request