0
BQ41Z90
  • BQ41Z90

BQ41Z90

PREVIEW

3 to 16 series Li-ion highly integrated battery fuel gauge, monitor and protector

Texas Instruments BQ41Z90 Product Info

1 April 2026 6

Parameters

Cell chemistry

Li-Ion/Li-Polymer, LiFePO4

Number of series cells

3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, >4 Cells

Communication interface

I2C, SMBus

Battery capacity (min) (mAh)

100

Battery capacity (max) (mAh)

65000

Implementation

Pack

Features

Cell balancing, Dynamic Z-Track™ technology, ECC authentication, Integrated Protector, SHA-256 Authentication, Turbo Mode

Operating temperature range (°C)

-40 to 105

Cell balancing

External, Internal

Rating

Catalog

Package

HTQFP (PVP)-64-81 mm² 9 x 9

Features

  • Highly integrated battery pack manager for 3 to 16 cells in series applications
    • Ultra-low power 32-bit RISC processor
    • ADC measurements for up to 16 cells in series with 80V tolerance
    • High Accuracy SoC and SoH with Dynamic Z Track™ gauging algorithm
    • Certificate-based security protected flash memory
  • Precision analog front end with two independent ADCs:
    • High-accuracy 18-bit integrating delta-sigma coulomb counter
    • High-accuracy 16-bit delta-sigma with input translation and multiplexer
    • Support for simultaneous current and voltage sampling
    • Supports up to eight external thermistor measurements and an internal temperature sensor
  • Strong High-side NMOS FET drive with fast turn-on and turn-off time
  • Charge pump support for pre-charge and pre-discharge NMOS FET drivers
  • Parallel configuration support for removable battery with separate charger and system ports
  • Cell balancing support up to 50mA bypass per cell
  • Diagnostic lifetime data monitor and recorder
  • Multiple host communication support:
    • I2C (up to 1MHz )
    • SMBus 3.2 (up to 1MHz)
  • Multiple power modes for low quiescent current operation
  • SHA-1, SHA-2, or EC-KCDSA authentication for robust battery pack security
  • Highly integrated battery pack manager for 3 to 16 cells in series applications
    • Ultra-low power 32-bit RISC processor
    • ADC measurements for up to 16 cells in series with 80V tolerance
    • High Accuracy SoC and SoH with Dynamic Z Track™ gauging algorithm
    • Certificate-based security protected flash memory
  • Precision analog front end with two independent ADCs:
    • High-accuracy 18-bit integrating delta-sigma coulomb counter
    • High-accuracy 16-bit delta-sigma with input translation and multiplexer
    • Support for simultaneous current and voltage sampling
    • Supports up to eight external thermistor measurements and an internal temperature sensor
  • Strong High-side NMOS FET drive with fast turn-on and turn-off time
  • Charge pump support for pre-charge and pre-discharge NMOS FET drivers
  • Parallel configuration support for removable battery with separate charger and system ports
  • Cell balancing support up to 50mA bypass per cell
  • Diagnostic lifetime data monitor and recorder
  • Multiple host communication support:
    • I2C (up to 1MHz )
    • SMBus 3.2 (up to 1MHz)
  • Multiple power modes for low quiescent current operation
  • SHA-1, SHA-2, or EC-KCDSA authentication for robust battery pack security

Description

The Texas Instruments BQ41Z90 is a fully integrated pack-based battery pack manager solution, that provides a flash programmable CPU, safety protection, and elliptical curve cryptography (ECC) authentication for 3 to 16 cells in series Li-ion, LiFeP4, NiMH, and Li-polymer battery packs.

The BQ41Z90 battery pack manager communicates through SMBus v3.2 or I2C-compatible interfaces, and combines an ultra-low-power, high-speed 32-bit processor, high-accuracy analog measurement capabilities, integrated flash memory, an array of peripheral IO, an NMOS protection FET drive, and a SHA-1, SHA-2, or EC-KCDSA authentication responder into a complete, high-performance battery management solution.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request