0
BQ2969T
  • BQ2969T
  • BQ2969T

BQ2969T

ACTIVE

Overvoltage protector for 2- to 4-series cell Li-Ion batteries with CTR or PTC function

Texas Instruments BQ2969T Product Info

1 April 2026 8

Parameters

Rating

Catalog

Number of series cells (max)

4

Number of series cells (min)

2

Features

LDO output, Overvoltage, Single pin output drive, Temp Monitoring (Thermistor Pin), Undervoltage

Function

Protection

Operating current (typ) (µA)

1

Vin (max) (V)

20

Operating temperature range (°C)

-40 to 110

Battery overvoltage protection (min) (V)

3.55

Battery overvoltage protection (max) (V)

5.1

Package

WSON (DSG)-8-4 mm² 2 x 2

Features

  • 2-series, 3-series, and 4-series cell overvoltage protection (OVP)
  • Factory programmed OVP threshold (3.6V to 5.2V) with ±12mV accuracy
  • Fixed delay timer to trigger FET drive output (0.25s to 6.5s options)
  • Control input pin, which can implement cell overtemperature protection (OT) using external PTC thermistor
  • Integrated 3mA regulated output programmable to 3.8V, 3.3V, 3.15V, 3.0V, 2.5V, 1.8V, or 1.5V
  • Factory programmed undervoltage (UV) detection threshold (1V to 4.15V) to disable regulator
    • OVP and OT remains operational even in undervoltage condition
  • Output pin options:
    • Active high
    • Open-drain - active pulldown
    • Open-drain - inactive pulldown
  • Multiple power modes:
    • NORMAL mode - no OV or UV: ICC ≅ 1.23µA
    • Undervoltage or disable mode - UV detected or control input low: ICC ≅ 0.25µA
    • Overvoltage mode - OV detected: ICC ≅ 15µA
  • Low leakage current per cell input < 100nA
  • Small package footprint
    • 8-Pin WSON (2mm × 2mm)
  • 2-series, 3-series, and 4-series cell overvoltage protection (OVP)
  • Factory programmed OVP threshold (3.6V to 5.2V) with ±12mV accuracy
  • Fixed delay timer to trigger FET drive output (0.25s to 6.5s options)
  • Control input pin, which can implement cell overtemperature protection (OT) using external PTC thermistor
  • Integrated 3mA regulated output programmable to 3.8V, 3.3V, 3.15V, 3.0V, 2.5V, 1.8V, or 1.5V
  • Factory programmed undervoltage (UV) detection threshold (1V to 4.15V) to disable regulator
    • OVP and OT remains operational even in undervoltage condition
  • Output pin options:
    • Active high
    • Open-drain - active pulldown
    • Open-drain - inactive pulldown
  • Multiple power modes:
    • NORMAL mode - no OV or UV: ICC ≅ 1.23µA
    • Undervoltage or disable mode - UV detected or control input low: ICC ≅ 0.25µA
    • Overvoltage mode - OV detected: ICC ≅ 15µA
  • Low leakage current per cell input < 100nA
  • Small package footprint
    • 8-Pin WSON (2mm × 2mm)

Description

The BQ2969T family is a high-accuracy, low-power overvoltage protector with a 3mA regulated output supply and control / PTC input for Li-ion and LiFePO4 (LFP) battery pack applications.

Each cell in a 2-series to 4-series cell stack is individually monitored for an overvoltage condition. An internal fixed-delay timer is initiated upon detection of an overvoltage condition on any cell. Upon expiration of the delay timer, the output pin is triggered into an active state to indicate that an overvoltage condition has occurred.

The regulated output supply delivers up to 3mA output current to drive always-on circuits, such as a real-time clock (RTC) oscillator. The BQ2969T family has a self-disable function to turn off the regulated output if any cell voltage falls below a programmable undervoltage threshold, thereby preventing drain on the battery.

The BQ2969T family includes a CTL pin which can be used to assert the OUT pin upon demand. The device also supports overtemperature (OT) protection when a PTC thermistor is attached between the CTL and VDD pins on the device.

The BQ2969T family provides exceptionally low power operation, drawing only 1.23µA during normal operation (excluding regulator load current), and dropping to 0.25uA when in an undervoltage condition. Even when in the undervoltage state, the device can still detect an overvoltage condition on any other cell (which can occur in an imbalanced pack) and can assert the output pin.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request