0
BQ25751
  • BQ25751
  • BQ25751

BQ25751

ACTIVE

Stand-alone or I²C controlled, 70V, buck-boost, lead acid battery charge controller with power path

Texas Instruments BQ25751 Product Info

1 April 2026 8

Parameters

Rating

Catalog

Number of series cells

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16

Cell chemistry

Lead Acid

Charge current (max) (A)

20

Features

Adjustable switching frequency, BAT temp thermistor monitoring (JEITA profile), Bidirectional, IC thermal regulation, ICO (Input Current Optimization), IINDPM (Input current limit), Input OVP, Integrated ADC, Integrated LDO, Power Path, SYNC Pin, USB C/PD compatible, VINDPM (Input voltage threshold to maximize adaptor power)

Vin (min) (V)

4.2

Vin (max) (V)

70

Absolute max Vin (max) (V)

85

Control topology

Switch-Mode Buck-boost

Battery charge voltage (min) (V)

0

Battery charge voltage (max) (V)

70

Control interface

I2C

TI functional safety category

Functional Safety-Capable

Operating temperature range (°C)

-40 to 125

Package

VQFN (RRV)-36-30 mm² 6 x 5

Features

  • Wide input voltage operating range: 4.4V to 70V
  • Wide battery voltage operating range: up-to 70V
    • 6V up-to 48V lead-acid charging profile with bulk, absorb and float voltage charging phases
    • Charge voltage temperature compensation
  • Synchronous buck charge controller with NFET drivers
    • Adjustable switching frequency from 200kHz to 600kHz
    • Optional synchronization to external clock
    • Integrated loop compensation with soft start
    • Optional gate driver supply input for optimized efficiency
  • Bidirectional converter operation (Reverse Mode) supporting USB-PD Extended Power Range (EPR)
    • Adjustable input voltage (VAC) regulation from 3.3V to 65V with 20mV/step
    • Adjustable input current regulation (RAC_SNS) from 400mA to 20A with 50mA/step using 2mΩ resistor
  • Direct power path management for highest efficiency to power system
    • System power selection from adapter or battery
    • Dynamic power management
    • All N-channel FET drivers
  • High accuracy
    • ±0.5% charge voltage regulation
    • ±3% charge current regulation
    • ±3% input current regulation
  • I2C controlled for optimal system performance with resistor-programmable option
    • Hardware adjustable input and output current limits
  • Integrated 16-bit ADC for voltage, current, and temperature monitoring
  • Low battery quiescent current
  • High safety integration
    • Adjustable input overvoltage and undervoltage protection
    • Battery Overvoltage and overcurrent protection
    • Charging safety timer in CV Mode
    • Thermal shutdown
  • Status outputs
    • Adapter present status (PG)
    • Charger Operation status
  • Package
    • 36-pin 6mm × 5mm QFN
  • Wide input voltage operating range: 4.4V to 70V
  • Wide battery voltage operating range: up-to 70V
    • 6V up-to 48V lead-acid charging profile with bulk, absorb and float voltage charging phases
    • Charge voltage temperature compensation
  • Synchronous buck charge controller with NFET drivers
    • Adjustable switching frequency from 200kHz to 600kHz
    • Optional synchronization to external clock
    • Integrated loop compensation with soft start
    • Optional gate driver supply input for optimized efficiency
  • Bidirectional converter operation (Reverse Mode) supporting USB-PD Extended Power Range (EPR)
    • Adjustable input voltage (VAC) regulation from 3.3V to 65V with 20mV/step
    • Adjustable input current regulation (RAC_SNS) from 400mA to 20A with 50mA/step using 2mΩ resistor
  • Direct power path management for highest efficiency to power system
    • System power selection from adapter or battery
    • Dynamic power management
    • All N-channel FET drivers
  • High accuracy
    • ±0.5% charge voltage regulation
    • ±3% charge current regulation
    • ±3% input current regulation
  • I2C controlled for optimal system performance with resistor-programmable option
    • Hardware adjustable input and output current limits
  • Integrated 16-bit ADC for voltage, current, and temperature monitoring
  • Low battery quiescent current
  • High safety integration
    • Adjustable input overvoltage and undervoltage protection
    • Battery Overvoltage and overcurrent protection
    • Charging safety timer in CV Mode
    • Thermal shutdown
  • Status outputs
    • Adapter present status (PG)
    • Charger Operation status
  • Package
    • 36-pin 6mm × 5mm QFN

Description

The BQ25751 is a wide input voltage, switched-mode buck-boost battery charge controller with direct power path control. The device offers high-efficiency battery charging over a wide voltage range with bulk, float and absorption charging for lead-acid batteries. The device integrates all the loop compensation for the buck-boost converter, thereby providing a high density solution with ease of use.

Besides the I2C host-controlled charging mode, the device also supports standalone charging mode via resistor programmable limits. Input current, charge current and charge voltage regulation targets can be set via the ILIM_HIZ, ICHG and FB pins, respectively.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request