0
SN74CBTLV3257
  • SN74CBTLV3257
  • SN74CBTLV3257
  • SN74CBTLV3257
  • SN74CBTLV3257
  • SN74CBTLV3257
  • SN74CBTLV3257
  • SN74CBTLV3257
  • SN74CBTLV3257
  • SN74CBTLV3257

SN74CBTLV3257

ACTIVE

3.3-V, 2:1 (SPDT), 4-channel analog switch with partial-power-down mode

Texas Instruments SN74CBTLV3257 Product Info

1 April 2026 8

Parameters

Protocols

Analog, I2C, I2S, JTAG, RGMII, SPI, TDM, UART

Configuration

2:1 SPDT

Number of channels

4

Bandwidth (MHz)

200

Supply voltage (max) (V)

3.6

Ron (typ) (mΩ)

5000

Input/output voltage (min) (V)

0

Input/output voltage (max) (V)

3.6

Operating temperature range (°C)

-40 to 85

Input/output continuous current (max) (mA)

128

COFF (typ) (pF)

5.5

Ron (max) (mΩ)

40000

VIH (min) (V)

2

VIL (max) (V)

0.8

Rating

Catalog

Package

SOIC (D)-16-59.4 mm² 9.9 x 6

Features

  • 5-Ω Switch Connection Between Two Ports
  • Rail-to-Rail Switching on Data I/O Ports
  • Ioff Supports Partial-Power-Down Mode Operation
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
  • ESD Protection Exceeds JESD 22
    • 2000-V Human-Body Model (A114-A)
    • 200-V Machine Model (A115-A)
  • 5-Ω Switch Connection Between Two Ports
  • Rail-to-Rail Switching on Data I/O Ports
  • Ioff Supports Partial-Power-Down Mode Operation
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
  • ESD Protection Exceeds JESD 22
    • 2000-V Human-Body Model (A114-A)
    • 200-V Machine Model (A115-A)

Description

The SN74CBTLV3257 device is a 4-bit 1-of-2 high-speed FET multiplexer/demultiplexer. The low on-state resistance of the switch allows connections to be made with minimal propagation delay.

The select (S) input controls the data flow. The FET multiplexers/demultiplexers are disabled when the output-enable (OE) input is high.

This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.

To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request