0
OPA2673
  • OPA2673
  • OPA2673
  • OPA2673
  • OPA2673

OPA2673

ACTIVE

Dual, Wideband, High Output Current Amplifier and PLC Line Driver with Active Off-line Control

Texas Instruments OPA2673 Product Info

1 April 2026 5

Parameters

Architecture

Current FB

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

5.75

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

13

GBW (typ) (MHz)

600

BW at Acl (MHz)

600

Acl, min spec gain (V/V)

1

Slew rate (typ) (V/µs)

3500

Vn at flatband (typ) (nV√Hz)

2.4

Vn at 1 kHz (typ) (nV√Hz)

5.5

Iq per channel (typ) (mA)

16.5

Vos (offset voltage at 25°C) (max) (mV)

7

Rail-to-rail

No

Features

Adjustable BW/IQ/IOUT, Shutdown

Rating

Catalog

Operating temperature range (°C)

-40 to 85

CMRR (typ) (dB)

56

Input bias current (max) (pA)

25000000

Offset drift (typ) (µV/°C)

25

Iout (typ) (mA)

700

2nd harmonic (dBc)

67

3rd harmonic (dBc)

80

Frequency of harmonic distortion measurement (MHz)

10

Package

VQFN (RGV)-16-16 mm² 4 x 4

Features

  • Wideband operation: 340 MHz (G = 4 V/V)
  • Unity-gain stable: 600 MHz (G = 1 V/V)
  • High output current: 700 mA
  • Active offline mode for TDMA
  • Adjustable power modes:
    • Full-bias mode: 16.5 mA/channel
    • 75% bias mode: 12.5 mA/channel
    • 50% bias mode: 8.5 mA/channel
    • Off-Line mode: 2.4 mA/channel
  • Bipolar-supply range: ±3.5 V to ±6.5 V
  • Single-supply range: 5.75 V to 13 V
  • High slew rate: 3500 V/µs
  • Overtemperature protection circuit
  • Output current limit (±1 A)
  • Wideband operation: 340 MHz (G = 4 V/V)
  • Unity-gain stable: 600 MHz (G = 1 V/V)
  • High output current: 700 mA
  • Active offline mode for TDMA
  • Adjustable power modes:
    • Full-bias mode: 16.5 mA/channel
    • 75% bias mode: 12.5 mA/channel
    • 50% bias mode: 8.5 mA/channel
    • Off-Line mode: 2.4 mA/channel
  • Bipolar-supply range: ±3.5 V to ±6.5 V
  • Single-supply range: 5.75 V to 13 V
  • High slew rate: 3500 V/µs
  • Overtemperature protection circuit
  • Output current limit (±1 A)

Description

The OPA2673 provides the high output current and low distortion required for power-line modem driver and test and measurement applications. The OPA2673 operates on power-supplies ranging from 5.75 V to 13 V and consumes a low 16.5 mA/channel quiescent current to deliver a very high 700 mA output current. The OPA2673 supports the most demanding power-line modem requirements with an 460 mA specified minimum output current drive (at 25°C).

Power-control features are included to minimize system power consumption. Two logic-control lines allow for four quiescent power settings, full power, 75% bias power, 50% bias power, and offline mode with active offline control, to provide high impedance to large signals present at the output pin. The two channels of the OPA2673 can be used independently as individual op amps, or can be configured as a differential-input to differential-output, high-current line driver.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request