0
LM74681
  • LM74681
  • LM74681
  • LM74681

LM74681

ACTIVE

100V Ideal diode bridge controller for PoE powered applications

Texas Instruments LM74681 Product Info

1 April 2026 6

Parameters

Vin (max) (V)

90

Vin (min) (V)

30

FET

External single FET

Device type

Ideal diode bridge controller

Number of channels

4

Rating

Catalog

Features

Enable, Full bridge diode rectifier controller, Linear control, Reverse current blocking, Reverse polarity protection, Under voltage lock out

Iq (typ) (mA)

0.27

Iq (max) (mA)

0.45

IGate source (typ) (µA)

160

IGate sink (typ) (mA)

100

Operating temperature range (°C)

-40 to 125

VSense reverse (typ) (mV)

-1

Design support

EVM

VGS (max) (V)

14

Shutdown current (ISD) (mA) (A)

0.0000382

Product type

Ideal diode controller

Package

WSON (DRR)-12-9 mm² 3 x 3

Features

  • Input operating voltage range: 30V to 90V
    • 100V absolute maximum
  • 4× integrated gate drive control
  • 165µA gate pull-up strength
  • 100mA gate pull-down strength
  • Ultra-low quiescent current of 0.27µA during detection and classification phase (VIN1-IN2 < 23V)
  • Linear gate regulation control for supply ORing applications
    • VTG_REG = 11mV
  • Enable pin for user controlled device on/off function
  • –40°C to 125°C operating junction temperature range
  • Small footprint: 3mm × 3mm WSON-12
    • Meets IPC-9592 spacing rules
  • Input operating voltage range: 30V to 90V
    • 100V absolute maximum
  • 4× integrated gate drive control
  • 165µA gate pull-up strength
  • 100mA gate pull-down strength
  • Ultra-low quiescent current of 0.27µA during detection and classification phase (VIN1-IN2 < 23V)
  • Linear gate regulation control for supply ORing applications
    • VTG_REG = 11mV
  • Enable pin for user controlled device on/off function
  • –40°C to 125°C operating junction temperature range
  • Small footprint: 3mm × 3mm WSON-12
    • Meets IPC-9592 spacing rules

Description

The LM74681 is a 100V ideal diode bridge controller capable of driving a MOSFET bridge, enabling efficient low-loss bridge rectifier solutions in Power over Ethernet (PoE) applications. It allows a Power over Ethernet, powered device (PD) to receive power from RJ-45 data pairs, spare pairs, or any combination of the two, regardless of voltage polarity. The integrated charge pump allows use of N-channel MOSFETs, which are smaller and more cost effective than P-channel MOSFETs for the same power level. The LM74681 along with N-channel MOSFET bridge can replace the conventional diode bridge and can be conveniently implemented in both 2-pair and 4-pair PoE PD systems. In the event of a power source failure or short circuit, a rapid turn-off feature reduces reverse current spikes. The device also features an ultra-low quiescent current of 0.27µA, which ensures that there is no data corruption during the PoE PD detection and classification phase. This device is characterized for operation over a junction temperature range of –40°C to +125°C.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request