0
LM74500-Q1
  • LM74500-Q1
  • LM74500-Q1

LM74500-Q1

ACTIVE

Reverse polarity protection controller

Texas Instruments LM74500-Q1 Product Info

1 April 2026 4

Parameters

Vin (max) (V)

65

Vin (min) (V)

3.2

FET

External single FET

Device type

Reverse polarity protector

Number of channels

1

Rating

Automotive

Features

Automotive load dump compatibility, Enable, Reverse polarity protection

Imax (A)

250

Iq (typ) (mA)

0.08

Iq (max) (mA)

0.13

TI functional safety category

Functional Safety-Capable

IGate source (typ) (µA)

11000

IGate pulsed (typ) (A)

2.3

Operating temperature range (°C)

-40 to 125

VSense reverse (typ) (mV)

65

Design support

EVM, Simulation Model

Shutdown current (ISD) (mA) (A)

0.001

Product type

Reverse polarity protector

Package

SOT-23-THN (DDF)-8-8.12 mm² 2.9 x 2.8

Features

  • AEC-Q100 qualified with the following results
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4B
  • 3.2-V to 65-V input range (3.9-V start up)
  • –65-V input reverse voltage rating
  • Charge pump for external N-Channel MOSFET
  • Enable pin feature
  • 1-µA shutdown current (EN=Low)
  • 80-µA typical operating quiescent current (EN=High)
  • Meets automotive ISO7637 pulse 1 transient requirements with additional TVS Diode
  • Available in 8-pin SOT-23 package 2.90 mm × 1.60 mm
  • AEC-Q100 qualified with the following results
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4B
  • 3.2-V to 65-V input range (3.9-V start up)
  • –65-V input reverse voltage rating
  • Charge pump for external N-Channel MOSFET
  • Enable pin feature
  • 1-µA shutdown current (EN=Low)
  • 80-µA typical operating quiescent current (EN=High)
  • Meets automotive ISO7637 pulse 1 transient requirements with additional TVS Diode
  • Available in 8-pin SOT-23 package 2.90 mm × 1.60 mm

Description

The LM74500-Q1 is an automotive AEC Q100 qualified controller which operates in conjunction with an external N-channel MOSFET as a low loss reverse polarity protection solution. The wide supply input range of 3.2 V to 65 V allows control of many popular DC bus voltages such as 12-V, 24-V and 48-V automotive battery systems. The 3.2-V input voltage support is particularly well suited for severe cold crank requirements in automotive systems. The device can withstand and protect the loads from negative supply voltages down to –65 V. The LM74500-Q1 does not have reverse current blocking and is suitable for input reverse poalrity protection of loads that can potentially deliver energy back to the input supply such as automotive body control module motor loads.

The LM74500-Q1 controller provides a charge pump gate drive for an external N-channel MOSFET. The high voltage rating of LM74500-Q1 helps to simplify the system designs for automotive ISO7637 protection. With the enable pin low, the controller is off and draws approximately 1 µA of current thus offering low system current when put into sleep mode.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request