0
LM3481
  • LM3481
  • LM3481
  • LM3481
  • LM3481

LM3481

ACTIVE

2.97V to 48V High-Efficiency Controller for Boost, SEPIC and Flyback

Texas Instruments LM3481 Product Info

1 April 2026 12

Parameters

Rating

Catalog

Topology

Boost, Flyback, Forward, SEPIC

Vin (max) (V)

48

Vin (min) (V)

2.97

Vout (max) (V)

500

Vout (min) (V)

1.26

Control mode

current mode

Features

Adjustable current limit, Enable, Frequency synchronization, Light-load efficiency, Nonsynchronous rectification, Prebias startup, UVLO adjustable

Duty cycle (max) (%)

85

Iq (typ) (A)

0.0037

Operating temperature range (°C)

-40 to 125

Package

VSSOP (DGS)-10-14.7 mm² 3 x 4.9

Features

  • 10-Lead VSSOP package
  • Internal push-pull driver with 1A peak current capability
  • Current limit and thermal shutdown
  • Frequency compensation optimized with a capacitor and a resistor
  • Internal soft start
  • Current mode operation
  • Adjustable undervoltage lockout with hysteresis
  • Pulse skipping at light loads
  • Key specifications
    • Wide supply voltage range of 2.97V to 48V
    • 100kHz to 1MHz Adjustable and synchronizable clock frequency
    • ±1.5% (over temperature) internal reference
    • 10µA shutdown current (over temperature)
  • Create a custom design using the LM3481 with the WEBENCH Power Designer
  • 10-Lead VSSOP package
  • Internal push-pull driver with 1A peak current capability
  • Current limit and thermal shutdown
  • Frequency compensation optimized with a capacitor and a resistor
  • Internal soft start
  • Current mode operation
  • Adjustable undervoltage lockout with hysteresis
  • Pulse skipping at light loads
  • Key specifications
    • Wide supply voltage range of 2.97V to 48V
    • 100kHz to 1MHz Adjustable and synchronizable clock frequency
    • ±1.5% (over temperature) internal reference
    • 10µA shutdown current (over temperature)
  • Create a custom design using the LM3481 with the WEBENCH Power Designer

Description

The LM3481 device is a versatile Low-Side N-FET high-performance controller for switching regulators. The device is designed for use in boost, SEPIC and flyback converters and topologies requiring a low-side FET as the primary switch. The LM3481 device can be operated at very high switching frequencies to reduce the overall solution size. The switching frequency of the LM3481 device can be adjusted to any value between 100kHz and 1MHz by using a single external resistor or by synchronizing it to an external clock. Current mode control provides superior bandwidth and transient response in addition to cycle-by-cycle current limiting. Current limit can be programmed with a single external resistor.

The LM3481 device has built-in protection features such as thermal shutdown, short-circuit protection and overvoltage protection. Power-saving shutdown mode reduces the total supply current to 5µA and allows power supply sequencing. Internal soft start limits the inrush current at start-up. Integrated current slope compensation simplifies the design and, if needed for specific applications, can be increased using a single resistor.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request