0
LM3302
  • LM3302
  • LM3302
  • LM3302

LM3302

ACTIVE

Quad, General Purpose Differential Comparator

Texas Instruments LM3302 Product Info

1 April 2026 5

Parameters

Number of channels

4

Output type

Open-collector, Open-drain

Propagation delay time (µs)

1.3

Vs (max) (V)

28

Vs (min) (V)

2

Rating

Catalog

Iq per channel (typ) (mA)

0.2

Vos (offset voltage at 25°C) (max) (mV)

20

Rail-to-rail

In to V-

Operating temperature range (°C)

-40 to 85

Input bias current (±) (max) (nA)

500

VICR (max) (V)

26.5

VICR (min) (V)

0

Package

PDIP (N)-14-181.42 mm² 19.3 x 9.4

Features

  • Single supply or dual supplies

  • Wide range of supply voltage . . . 2V to 28V
  • Low supply-current drain independent of supply voltage . . . 0.8mA typical
  • Low input bias current . . . 25nA typical
  • Low input offset current . . . 3nA typical
  • Low input offset voltage . . . 3mV typical
  • Common-mode input voltage range includes ground
  • Differential input voltage range equal to maximum-rated supply voltage: ±28V
  • Low output saturation voltage
  • Output compatible with TTL, MOS, and CMOS
  • For wider temperature range, see the LM2901
  • For single version, see the TL331
  • For dual version, see the LM393 or LM2903

  • Single supply or dual supplies

  • Wide range of supply voltage . . . 2V to 28V
  • Low supply-current drain independent of supply voltage . . . 0.8mA typical
  • Low input bias current . . . 25nA typical
  • Low input offset current . . . 3nA typical
  • Low input offset voltage . . . 3mV typical
  • Common-mode input voltage range includes ground
  • Differential input voltage range equal to maximum-rated supply voltage: ±28V
  • Low output saturation voltage
  • Output compatible with TTL, MOS, and CMOS
  • For wider temperature range, see the LM2901
  • For single version, see the TL331
  • For dual version, see the LM393 or LM2903

Description

This device consists of four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2V to 28V and VCC is a least 1.5V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request