0
INA146
  • INA146
  • INA146

INA146

ACTIVE

High-Voltage, Programmable Gain Difference Amplifier

Texas Instruments INA146 Product Info

1 April 2026 9

Parameters

Number of channels

1

Vs (min) (V)

2.76

Vs (max) (V)

36

CMRR (min) (dB)

76

Common-mode input low (min) (V)

-100

Common-mode input high (max) (V)

100

Input offset (±) (max) (V)

0.005

Iq (typ) (mA)

0.6

Slew rate (typ) (V/µs)

0.45

Voltage gain (min) (V/V)

0.1

Voltage gain (max) (V/V)

100

Small-signal bandwidth (typ) (Hz)

500000

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Gain drift (max) (ppm/°C)

1

Gain error (±) (max) (%)

0.1

Package

SOIC (D)-8-29.4 mm² 4.9 x 6

Features

  • High common-mode voltage:
    • 40V at VS = 5V
    • ±100V at VS = ±15V
  • Differential gain = 0.1V/V TO 100V/V:
    • Set with External Resistors
  • Low quiescent current: 570µA
  • Wide supply range:
    • Single Supply: 4.5V to 36V
    • Dual Supplies: ±2.25V to ±18V
  • Low gain error: 0.025%
  • High common-mode rejection: 80dB
  • High common-mode voltage:
    • 40V at VS = 5V
    • ±100V at VS = ±15V
  • Differential gain = 0.1V/V TO 100V/V:
    • Set with External Resistors
  • Low quiescent current: 570µA
  • Wide supply range:
    • Single Supply: 4.5V to 36V
    • Dual Supplies: ±2.25V to ±18V
  • Low gain error: 0.025%
  • High common-mode rejection: 80dB

Description

The INA146 is a precision difference amplifier that can be used to accurately attenuate high differential voltages and reject high common-mode voltages for compatibility with common signal processing voltage levels. High-voltage capability also affords inherent input protection. The input common-mode range extends beyond both supply rails, making the INA146 an excellent choice for both single and dual supply applications.

On-chip precision resistors are laser-trimmed to achieve accurate gain and high common-mode rejection. Excellent TCR tracking of these resistors provides continued high precision over temperature.

A 10:1 difference amplifier provides 0.1V/V gain when the output amplifier is used as a unity-gain buffer. In this configuration, input voltages up to ±100V can be measured. Gains greater than 0.1V/V can be set with an external resistor pair without affecting the common-mode input range.

The INA146 is available in the SO-8 surface-mount package specified for the extended industrial temperature range, –40°C to 85°C.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request