0
DRV8421
  • DRV8421
  • DRV8421
  • DRV8421
  • DRV8421

DRV8421

ACTIVE

18V, 2A dual H-bridge motor driver

Texas Instruments DRV8421 Product Info

1 April 2026 7

Parameters

Vs ABS (max) (V)

20

Vs (min) (V)

4

Peak output current (A)

2

Control mode

PWM

Control interface

Hardware (GPIO)

Number of full bridges

2

RDS(ON) (HS + LS) (mΩ)

900

Features

Low-Power Sleep Mode

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Package

HVSSOP (DGQ)-10-14.7 mm² 3 x 4.9

Features

  • Dual H-Bridge Motor Driver
    • Single/Dual Brushed DC
    • Stepper
    • Solenoids
  • 4 to 18V Operating Supply Voltage Range
  • Low ON-resistance: HS + LS = 900mΩ (Typical, 25°C)
  • High Output Current per H-Bridge
    • 2A Maximum Driver Current at 12V and TA = 25°C
    • Parallel Mode Available Capable of 4A Maximum Driver Current at 12V and TA = 25°C
  • Device versions:
    • DRV8421A (4-wire input): Independent Half Bridge Control
    • DRV8421B (2-wire input): Sleep Mode, Fault detect
  • Similar LV Stepper Drivers:
    • DRV8410: 1.65 to 11V (800mΩ RDS(ON))
    • DRV8411: 1.65 to 11V (400mΩ RDS(ON))
    • DRV8411A: 1.65 to 11V (400mΩ RDS(ON))
  • PWM Control Interface
  • Low-Current 3µA Sleep Mode (2-wire input version only)
  • Thermally-Enhanced Surface Mount Package
  • Protection Features
    • VM Undervoltage Lockout (UVLO)
    • Overcurrent Protection (OCP)
    • Thermal Shutdown (TSD)
    • Fault Condition Indication Pin (nFAULT) (2-wire input version only)
  • Dual H-Bridge Motor Driver
    • Single/Dual Brushed DC
    • Stepper
    • Solenoids
  • 4 to 18V Operating Supply Voltage Range
  • Low ON-resistance: HS + LS = 900mΩ (Typical, 25°C)
  • High Output Current per H-Bridge
    • 2A Maximum Driver Current at 12V and TA = 25°C
    • Parallel Mode Available Capable of 4A Maximum Driver Current at 12V and TA = 25°C
  • Device versions:
    • DRV8421A (4-wire input): Independent Half Bridge Control
    • DRV8421B (2-wire input): Sleep Mode, Fault detect
  • Similar LV Stepper Drivers:
    • DRV8410: 1.65 to 11V (800mΩ RDS(ON))
    • DRV8411: 1.65 to 11V (400mΩ RDS(ON))
    • DRV8411A: 1.65 to 11V (400mΩ RDS(ON))
  • PWM Control Interface
  • Low-Current 3µA Sleep Mode (2-wire input version only)
  • Thermally-Enhanced Surface Mount Package
  • Protection Features
    • VM Undervoltage Lockout (UVLO)
    • Overcurrent Protection (OCP)
    • Thermal Shutdown (TSD)
    • Fault Condition Indication Pin (nFAULT) (2-wire input version only)

Description

The DRV8421 provides a dual H-bridge motor driver for home appliances and other mechatronic applications. The device can be used to drive one or two DC motors, a bipolar stepper motor, or other loads. A simple PWM interface allows easy interfacing to controller circuits.

The output block of each H-bridge driver consists of N-channel power MOSFETs configured as full H-bridges to drive the motor windings. The DRV8421 is capable of driving a maximum current of 2A from each output or 4A in parallel mode (with proper heat sinking, at 12V and TA = 25°C).

The device contains two versions having a 4-wire input (DRV8421A) or a 2-wire input (DRV8421B). The 2-wire input version (DRV8421B) contains features like enable and fault detection, while the 4-wire input version (DRV8421A) can drive four half bridges based on signals to four input terminals. A low-power sleep mode is also provided for the 2-wire input version. It shuts down internal circuitry to achieve very-low quiescent current draw. This sleep mode can be set by pulling the enable pin low.

Internal protection functions are provided for UVLO, OCP, short-circuit protection, and overtemperature. Fault conditions are indicated by a nFAULT pin in the DRV8421B, the 2-wire input device.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request