0
BQ76907
  • BQ76907
  • BQ76907

BQ76907

ACTIVE

Low-power monitor and protector for 2S to 7S with high accuracy cell voltage measurement

Texas Instruments BQ76907 Product Info

1 April 2026 18

Parameters

Rating

Catalog

Number of series cells (max)

7

Number of series cells (min)

2

Features

Digital output, I2C support, Integrated ADC, LDO output, Low-Power Sleep Mode, Low-side driver, Multi-cell support, One-time-programmable (OTP) memory, Open-wire detection, Overcurrent in charging protection, Overcurrent in discharging protection, Overtemperature protection, Overvoltage protection, Short-current detection, Sleep Mode, Temperature sensing, Undertemperature protection, Undervoltage protection

Vin (max) (V)

38.5

Communication interface

I2C

Device type

Cell monitor and balancer, Protector

Operating temperature range (°C)

-40 to 110

Battery overvoltage protection (min) (V)

0

Battery overvoltage protection (max) (V)

5.5

Operating current (typ) (µA)

140

Package

VQFN (RGR)-20-12.25 mm² 3.5 x 3.5

Features

  • Battery monitoring capability for 2-series to 7-series cells
  • Integrated low-side drivers for NFET protection with optional autonomous recovery
  • Extensive protection suite including voltage, temperature, current, and internal diagnostics
  • 16-bit delta-sigma voltage ADC
    • High accuracy cell voltage measurement of 4 mV (typical)
  • Dedicated 16- or 24-bit delta-sigma coulomb counter ADC
    • High-accuracy current measurement with low input offset error
    • Wide-range current applications (±200-mV measurement range across sense resistor)
    • 48-bit accumulated charge integrator with timer
  • Host-controlled cell balancing
  • Multiple power modes (typical battery pack operating range conditions)
    • NORMAL mode: 32 µA to 175 µA
    • SLEEP mode: 6 µA
    • DEEPSLEEP mode: 2.7 µA
    • SHUTDOWN mode: <1 µA
  • High-voltage tolerance of 45 V on cell connect and select additional pins
  • Support for temperature sensing using an internal sensor and an external thermistor
  • Integrated one-time-programmable (OTP) memory for device settings, programmed by TI
  • 400-kHz I 2C serial communications with optional CRC support
  • Programmable LDO for external system usage
  • 20-pin QFN (RGR) package
  • Battery monitoring capability for 2-series to 7-series cells
  • Integrated low-side drivers for NFET protection with optional autonomous recovery
  • Extensive protection suite including voltage, temperature, current, and internal diagnostics
  • 16-bit delta-sigma voltage ADC
    • High accuracy cell voltage measurement of 4 mV (typical)
  • Dedicated 16- or 24-bit delta-sigma coulomb counter ADC
    • High-accuracy current measurement with low input offset error
    • Wide-range current applications (±200-mV measurement range across sense resistor)
    • 48-bit accumulated charge integrator with timer
  • Host-controlled cell balancing
  • Multiple power modes (typical battery pack operating range conditions)
    • NORMAL mode: 32 µA to 175 µA
    • SLEEP mode: 6 µA
    • DEEPSLEEP mode: 2.7 µA
    • SHUTDOWN mode: <1 µA
  • High-voltage tolerance of 45 V on cell connect and select additional pins
  • Support for temperature sensing using an internal sensor and an external thermistor
  • Integrated one-time-programmable (OTP) memory for device settings, programmed by TI
  • 400-kHz I 2C serial communications with optional CRC support
  • Programmable LDO for external system usage
  • 20-pin QFN (RGR) package

Description

The Texas Instruments BQ76907 provides a highly integrated, high-accuracy battery monitor and protector for 2-series to 7-series Li-ion, Li-polymer, LiFePO 4 (LFP), and LTO battery packs. The device includes a high-accuracy monitoring system with a dedicated coulomb counter and accumulated charge integration, a highly configurable protection subsystem, and support for host-controlled cell balancing. Integration includes low-side protection NFET drivers, a programmable LDO for external system use, and an I 2C host communication interface supporting up to 400-kHz operation with optional CRC. The BQ76907 is available in a 20-pin QFN package.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request