0
BQ78702B
  • BQ78702B
  • BQ78702B

BQ78702B

ACTIVE

18-S stackable battery monitor with balancer and integrated protector compliant to ASIL-B

Texas Instruments BQ78702B Product Info

1 April 2026 7

Parameters

Rating

Catalog

Number of series cells (max)

18

Number of series cells (min)

9

Features

Cell balancing, High precision, I2C support, Integrated ADC, Multi-cell support, Open-wire detection, Overtemperature protection, Overvoltage protection, Separate MCU requirement, Stackable (built-in interface), Temperature sensing, Undertemperature protection, Undervoltage protection

Vin (max) (V)

90

Communication interface

Daisy Chain, Daisy chain, I2C controller, SPI controller, UART

Operating temperature range (°C)

-40 to 125

Battery overvoltage protection (min) (V)

2.7

Battery overvoltage protection (max) (V)

5.1

TI functional safety category

Functional Safety-Compliant

Package

HTQFP (PAP)-64-144 mm² 12 x 12

Features

  • Device qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C1
  • Functional Safety-Compliant
    • Documentation to aid ISO 26262 and IEC 61508 system design
    • Systematic capability up to ASIL B and SIL2
    • Hardware intergity up to ASIL B and SIL 2
  • Measure 9 to 18 batteries in series per device, stackable up to 64 devices
  • Dedicated ADC with ±3.0mV accuracy for 1-5V input (-40°C to +125°C)
  • Cell voltage and battery pack current measurement synchronized to 64µs
  • Support limp mode with full redundancy
  • Integrated post-ADC configurable digital low-pass filters
  • Supports busbar without affecting measurement accuracy
  • 12 GPIOs for temp sensor/analog/digital/I2C controller/SPI controller
  • Internal cell balancing
    • Balancing at 300mA
    • User controlled PWM adjustment cell balancing current
    • Built-in balancing thermal management with automatic pause and resume control
  • Robust daisy chain communication and support Ring Architecture
  • Hardware reset by host simulates POR-like event without battery removal
  • Support transformer and capacitive isolation
  • On chip memory for one time custom programming
  • Low power mode current <6µA
  • Compatible with BQ79600-Q1 with SPI/UART interface
  • Device qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C1
  • Functional Safety-Compliant
    • Documentation to aid ISO 26262 and IEC 61508 system design
    • Systematic capability up to ASIL B and SIL2
    • Hardware intergity up to ASIL B and SIL 2
  • Measure 9 to 18 batteries in series per device, stackable up to 64 devices
  • Dedicated ADC with ±3.0mV accuracy for 1-5V input (-40°C to +125°C)
  • Cell voltage and battery pack current measurement synchronized to 64µs
  • Support limp mode with full redundancy
  • Integrated post-ADC configurable digital low-pass filters
  • Supports busbar without affecting measurement accuracy
  • 12 GPIOs for temp sensor/analog/digital/I2C controller/SPI controller
  • Internal cell balancing
    • Balancing at 300mA
    • User controlled PWM adjustment cell balancing current
    • Built-in balancing thermal management with automatic pause and resume control
  • Robust daisy chain communication and support Ring Architecture
  • Hardware reset by host simulates POR-like event without battery removal
  • Support transformer and capacitive isolation
  • On chip memory for one time custom programming
  • Low power mode current <6µA
  • Compatible with BQ79600-Q1 with SPI/UART interface

Description

The BQ78702B provides high-accuracy cell voltage measurements for up to 18S battery modules in high-voltage battery management systems in energy storage systems. This device has a state-of-the-art ADC architecture/measurement system meeting stringent safety requirements. With the daisy-chain isolated by transformer (or capacitor), the device is designed for centralized or distributed system architectures.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request